ISDN_RESET_B3.ISDN_CONF(D7isdn)
ISDN_RESET_B3.ISDN_CONF --
ISDN reset logical connection confirmation
Synopsis
#include <sys/stream.h>
#include <sys/mdi.h>
#include <sys/types.h>
#include <sys/scoisdn.h>
typedef struct isdn_reset_b3_conf
{
isdnNCCI_t ncci;
isdnInfo_t info;
} isdn_reset_b3_conf_t;
Description
The ISDN_RESET_B3.ISDN_CONF message consists of one
M_PROTO(D7str)
message block confirming the
ISDN_RESET_B3.ISDN_REQ(D7isdn).
to reset a logical connection.
Parameters
ncci
-
Network Control Connection Identifier; see
isdnNCCI(D4isdn).
info
-
additional information elements; see
isdnInfo(D4isdn).
Valid values are:
-
ISDN_INFOCODE00_OK: reset initiated
-
ISDN_INFOCODE00_BADNCPI: NCPI (Network Control
Protocol Information) not supported by current protocol, NCPI ignored.
-
ISDN_INFOCODE20_ESTATE: message not supported in
current state
-
ISDN_INFOCODE20_EPLCI: illegal NCCI (Network Control
Connection Identifier)
-
ISDN_INFOCODE20_EPARAM: illegal message parameter coding
-
ISDN_INFOCODE30_NCPI: NCPI not supported
-
ISDN_INFOCODE30_RESET: reset procedure not supported
by current protocol
References
Intro(D4isdn),
Intro(D7isdn)
ISDN_RESET_B3.ISDN_IND(D7isdn),
ISDN_RESET_B3.ISDN_REQ(D7isdn),
ISDN_RESET_B3.ISDN_RESP(D7isdn)
``SCO ISDN adapter drivers'' in Developing MDI network adapter drivers
19 June 2005
© 2005 The SCO Group, Inc. All rights reserved.
OpenServer 6 and UnixWare (SVR5) HDK - June 2005