dig(1Mtcp)
dig --
DNS lookup utility
SYNOPSIS
dig
@server
-b address
-c class
-f filename
-k filename
-p port#
-t type
-x addr
-y name:key
name
type
class
queryopt ...
dig
-h
dig
global-queryopt ...
query1
query2 ...
DESCRIPTION
dig
(domain information groper) is a flexible tool for interrogating DNS
name servers.
It performs DNS lookups and displays the answers that are returned from
the name server(s) that were queried.
Most DNS administrators use
dig
to troubleshoot DNS problems because of its flexibility, ease of use and
clarity of output.
Other lookup tools tend to have less functionality than
dig .
Although
dig
is normally used with command-line arguments, it also has a batch
mode of operation for reading lookup requests from a file.
A brief summary of its command-line arguments and options is printed
when the
-h
option is given.
Unlike earlier versions, the BIND9 implementation of
dig
allows multiple lookups to be issued from the command line.
Unless it is told to query a specific name server,
dig
will try each of the servers listed in
/etc/resolv.conf .
When no command line arguments or options are given,
will perform an NS query for "." (the root).
SIMPLE USAGE
A typical invocation of
dig
looks like:
dig @server name type
where:
server-
is the name or IP address of the name server to query.
An IPv4 address can be provided in dotted-decimal notation.
When the supplied
server
argument is a hostname,
dig
resolves that name before querying that name server.
If no
server
argument is provided,
dig
consults
/etc/resolv.conf
and queries the name servers listed there.
The reply from the name server that responds is displayed.
name-
is the name of the resource record that is to be looked up.
type-
indicates what type of query is required - ANY, A, MX, SIG, etc.
type
can be any valid query type.
If no
type
argument is supplied,
dig
will perform a lookup for an A record.
OPTIONS
The
-b
option sets the source IP address of the query to
address .
This must be a valid
address on one of the host's network interfaces.
The default query class (IN for internet) is overridden by the
-c
option.
class
is any valid class, such as HS for Hesiod records or CH for
CHAOSNET records.
The
-f
option makes
dig
operate in batch mode by reading a list of lookup requests to process
from the file
filename .
The file contains a number of queries, one per line.
Each entry in the file should be organised in the same way they would be
presented as queries to
dig
using the command-line interface.
If a non-standard port number is to be queried, the
-p
option is used.
port#
is the port number that
dig
will send its queries instead of the standard DNS port number 53.
This option would be used to test a name server that has been configured
to listen for queries on a non-standard port number.
The
-t
option sets the query type to
type .
It can be any valid query type which is supported in BIND9.
The default query type "A", unless the
-x
option is supplied to indicate a reverse lookup.
A zone transfer can be requested by specifying a type of AXFR.
When an incremental zone transfer (IXFR) is required,
type
is set to
ixfr=N .
The incremental zone transfer will contain the changes made to the zone
since the serial number in the zone's SOA record was
N .
Reverse lookups - mapping addresses to names - are simplified
by the
-x
option.
addr
is an IPv4 address in dotted-decimal notation, or a colon-delimited
IPv6 address.
When this option is used, there is no need to provide the
name ,
class
and
type
arguments.
dig
automatically performs a lookup for a name like
11.12.13.10.in-addr.arpa
and sets the query type and class to PTR and IN respectively.
By default, IPv6 addresses are looked up using the
IP6.ARPA domain and binary labels as defined in RFC2874.
To use the older RFC1886 method using the IP6.INT domain and "nibble" labels,
specify the
-n
(nibble) option.
To sign the DNS queries sent by
dig
and their responses using transaction signatures (TSIG),
specify a TSIG key file using the
-k
option. You can also specify the TSIG key itself on the command
line using the
-y
option;
name
is the name of the TSIG key and
key
is the actual key. The key is a base-64 encoded string,
typically generated by
dnssec-keygen(1Mtcp).
Caution should be taken when using the
-y
option on multi-user systems as the key can be visible
in the output from
ps(1)
or in the shell's history file.
When using TSIG authentication with
dig ,
the name server that is queried needs to know the key and algorithm
that is being used.
In BIND, this is done by providing appropriate
key
and
server
statements in
named.conf .
QUERY OPTIONS
dig
provides a number of query options which affect the way in which
lookups are made and the results displayed.
Some of these set or reset flag bits in the query header,
some determine which sections of the answer get printed,
and others determine the timeout and retry strategies.
Each query option is identified by a keyword preceded by a
plus sign: "+".
Some keywords set or reset an option.
These may be preceded by the string "no" to negate the meaning of
that keyword.
Other keywords assign values to options like the timeout interval.
They have the form
+keyword=value .
The query options are:
+[no]tcp-
Use [do not use] TCP when querying name servers.
The default behaviour is to use UDP unless an AXFR or IXFR query is
requested, in which case a TCP connection is used.
+[no]vc-
Use [do not use] TCP when querying name servers.
This alternate syntax to
+[no]tcp
is provided for backwards compatibility.
The "vc" stands for "virtual circuit".
+[no]ignore-
Ignore truncation in UDP responses instead of
retrying with TCP. By default, TCP retries are
performed.
+domain=somename-
Set the default domain to
somename ,
as if specified in a
domain
directive in
/etc/resolv.conf .
+[no]search-
Use [do not use] the search list in
resolv.conf
(if any).
The search list is not used by default.
+[no]defname-
Use [do not use] the default domain name, if any, in
resolv.conf
The default is not to append that name to
name
when making queries.
+[no]aaonly-
This option does nothing.
It is provided for compatibilty with old versions of
dig
where it set an unimplemented resolver flag.
+[no]adflag-
Set [do not set] the AD (authentic data) bit in the query.
The AD bit currently has a standard meaning only in responses,
not in queries, but the ability to set the bit in the query
is provided for completeness.
+[no]cdflag-
Set [do not set] the CD (checking disabled) bit in the query.
This requests the server to not perform DNSSEC validation
of responses.
+[no]recursive-
Toggle the setting of the RD (recursion desired) bit in the query.
This bit is set by default, which means
dig .
normally sends recursive queries.
Recursion is automatically disabled when the
+nssearch
or
+trace
query options are used.
+[no]nssearch-
When this option is set,
dig
attempts to find the authoritative name servers for the zone containing
the name being looked up and
display the SOA record that each name server has for the zone.
+[no]trace-
Toggle tracing of the delegation path from the root name servers for
the name being looked up.
Tracing is disabled by default.
When tracing is enabled,
dig
makes iterative queries to resolve the name being looked up.
It will follow referrals from the root servers, showing
the answer from each server that was used to resolve the lookup.
+[no]cmd-
toggles the printing of the initial comment in the output identifying
the version of
dig
and the query options that have been applied.
This comment is printed by default.
+[no]short-
Provide a terse answer.
The default is to print the answer in a verbose form.
+[no]identify-
Show [or do not show] the IP address and port number that supplied the
answer when the
+short
option is enabled.
If short form answers are requested, the default is not to show
the source address and port number of the server that provided the
answer.
+[no]comments-
Toggle the display of comment lines in the output.
The default is to print comments.
+[no]stats-
This query option toggles the printing of statistics: when the query was
made, the size of the reply and so on.
The default behaviour is to print the query statistics.
+[no]qr-
Print [do not print] the query as it is sent.
before sending the query. By default, the query is not printed.
+[no]question-
Print [do not print] the question section of a query when an answer is
returned.
The default is to print the question section as a comment.
+[no]answer-
Display [do not display] the answer section of a reply.
The default is to display it.
+[no]authority-
Display [do not display] the authority section of a reply.
The default is to display it.
+[no]additional-
Display [do not display] the additional section of a reply.
The default is to display it.
+[no]all-
Set or clear all display flags
+time=T-
Sets the timeout for a query to
T
seconds.
The default time out is 5 seconds.
An attempt to set
T
to less than 1 will result in a query timeout of 1 second being applied.
+tries=A-
Sets the number of times to retry UDP queries to server to
T
instead of the default, 3.
If
T
is less than or equal to zero, the number of retries is silently rounded
up to 1.
+ndots=D-
Set the number of dots that have to appear in
name
to
D
for it to be considered absolute. The default value is that
defined using the ndots statement in
/etc/resolv.conf ,
or 1 if no ndots statement is present. Names with fewer
dots are interpreted as relative names and will be searched
for in the domains listed in the
search
or
domain
directive in
/etc/resolv.conf .
+bufsize=B-
Set the UDP message buffer size advertised using EDNS0 to
B
bytes.
The maximum and minimum sizes of this buffer are 65535 and 0
respectively.
Values outside this range are rounded up or down appropriately.
MULTIPLE QUERIES
The BIND 9
implementation of
dig
supports specifying multiple queries on the command line
(in addition to supporting the
-f
batch file option).
Each of those queries can be supplied with its own set of flags,
options and query options.
In this case,
query1 ,
query2
and so on represent an individual query in the command-line syntax described
above.
Each consists of any of the standard options and flags, the name to be looked
up, an optional query type and class and any query options that should
be applied to that query.
A global set of query options, which should be applied to all queries, can
also be supplied.
These global query options must precede the first tuple of name, class, type,
options, flags, and query options supplied on the command line.
Any global query options can be overridden by a
query-specific set of query options.
For example:
dig +qr www.isc.org any -x 127.0.0.1 isc.org ns +noqr
shows how
dig
could be used from the command line to make three lookups: an ANY query
for
www.isc.org ,
a reverse lookup of 127.0.0.1
and
a query for the NS records of
isc.org .
A global query option of
+qr
is applied, so that
dig
shows the initial query it made for each lookup.
The final query has a local query option of
+noqr
which means that
dig
will not print the initial query when it looks up the
NS records for
isc.org .
FILES
/etc/resolv.conf
SEE ALSO
host(1Mtcp),
in.named(1Mtcp),
dnssec-keygen(1Mtcp),
resolver(3N),
and RFC1035.
© 2004 The SCO Group, Inc. All rights reserved.
UnixWare 7 Release 7.1.4 - 25 April 2004