-
Hardware configuration overview
This topic presents general hardware configuration
information including: new and updated device support,
supported architecture, general compatibility issues,
using configuration interfaces, rebuilding your system,
and troubleshooting hardware problems.
-
Mass storage devices overview
This topic provides an overview of the Storage Device
Interface (SDI) and information about various commands and procedures that
are available for managing mass storage devices and media.
-
Using the Device Configuration Utility (DCU)
This topic describes how to use the Device Configuration Utility (DCU)
to view or update hardware device configuration, or view or activate
software device drivers.
-
Adding ISDN devices
This topic provides general information about ISDN, and describes adding,
configuring and removing ISDN devices. Troubleshooting tips are also
given.
-
Adding hard disks
This topic describes how to use the diskadd command to add
additional hard disks to your system. An example is provided.
-
Adding and configuring modems
This topic describes how to install, configure and test modems.
Troubleshooting information is also provided.
-
Adding or removing hardware controllers
This topic describes how to add or remove hardware
controllers or adapters on your system.
-
Adding tape drives
This topic describes how to add a tape drive to your system.
-
Configuring LAN connections
This topic describes the Network Configuration Manager interface,
configuration parameters (hardware, driver and protocol),
configuring network hardware, and removing a network configuration.
Troubleshooting information is also provided.
-
Configuring WAN connections
This topic describes using the WAN view of the Network Configuration
Manager to configure WAN hardware, WAN software and call services.
-
Configuring Plug and Play devices
This topic describes use of the PnP Configuration Manager
to configure devices that conform to the Plug and Play ISA
Version 1.0A.
-
Configuring audio adapters
This topic describes using the Audio Configuration Manager, provides
general information about the audio subsystem, describes adding or removing
audio adapters, and discusses common tasks associated with the audio subsystem.
Troubleshooting information is also provided.
-
Configuring serial ports
This topic describes use of the Serial Manager to configure serial ports.
-
Configuring video adapters
This topic describes using the Video Configuration Manager, adding and
testing a video adapter, changing the monitor or resolution,
removing a video configuration, and configuring unsupported adapters.
-
Hot adding or removing SCSI storage devices
This topic describes how to add or remove a SCSI storage device
from a ``hot'' (running) system.
-
Managing Hot Plugable controllers
This topic describes how to use the Hot-plug Manager to
add, remove or replace a PCI-based
controller on a ``hot'' (running) system.
This information only applies for machines that support the hot-plug feature
(machines that have a built-in hot-plug controller,
and provide the ability to turn power on or off to selected slots).
-
Mouse administration
This topic discusses using the mouseadmin command to add, remove,
change the configuration of, or test a mouse or similar pointing device.
-
Working with diskettes
This topic discusses diskette drive device names, and provides information
about working with diskettes including: duplicating, formatting, displaying
information, and copying files.
-
Accessing the SCO Compatible Hardware Web Pages
This topic provides information about accessing the SCO Compatible Hardware
Web Pages (CHWP).
The CHWP include listings of devices supported on SCO platforms,
notices of new and updated drivers for supported devices, and technical
information concerning driver installation, configuration and troubleshooting.
-
Configuration parameters
This topic provides values for configuration parameters for:
General configuration parameters used by many types of devices,
Network ``custom'' parameters used by some network adapters, and
Token-Ring network ``custom'' parameters used by some Token-Ring network
adapters.
UNRESOLVED XREF-0
This topic provides configuration notes for a variety of network adapters.
The