|
|
Table of Contents
AUTO_INCREMENT
This chapter provides a tutorial introduction to MySQL by showing how to use the mysql client program to create and use a simple database. mysql (sometimes referred to as the “terminal monitor” or just “monitor”) is an interactive program that allows you to connect to a MySQL server, run queries, and view the results. mysql may also be used in batch mode: you place your queries in a file beforehand, then tell mysql to execute the contents of the file. Both ways of using mysql are covered here.
To see a list of options provided by mysql,
invoke it with the --help
option:
shell> mysql --help
This chapter assumes that mysql is installed on your machine and that a MySQL server is available to which you can connect. If this is not true, contact your MySQL administrator. (If you are the administrator, you need to consult the relevant portions of this manual, such as Chapter 5, Database Administration.)
This chapter describes the entire process of setting up and using a database. If you are interested only in accessing an existing database, you may want to skip over the sections that describe how to create the database and the tables it contains.
Because this chapter is tutorial in nature, many details are necessarily omitted. Consult the relevant sections of the manual for more information on the topics covered here.
To connect to the server, you will usually need to provide a MySQL user name when you invoke mysql and, most likely, a password. If the server runs on a machine other than the one where you log in, you will also need to specify a host name. Contact your administrator to find out what connection parameters you should use to connect (that is, what host, user name, and password to use). Once you know the proper parameters, you should be able to connect like this:
shell>mysql -h
Enter password:host
-uuser
-p********
host
and user
represent the
host name where your MySQL server is running and the user name of
your MySQL account. Substitute appropriate values for your setup.
The ********
represents your password; enter it
when mysql displays the Enter
password:
prompt.
If that works, you should see some introductory information
followed by a mysql>
prompt:
shell>mysql -h
Enter password:host
-uuser
-p********
Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 25338 to server version: 5.0.19-standard Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql>
The mysql>
prompt tells you that
mysql is ready for you to enter commands.
If you are logging in on the same machine that MySQL is running on, you can omit the host, and simply use the following:
shell< mysql -u user
-p
If, when you attempt to log in, you get an error message such as ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2), it means that that MySQL server daemon (Unix) or service (Windows) is not running. Consult the administrator or see the section of Chapter 2, Installing and Upgrading MySQL that is appropriate to your operating system.
For help with other problems often encountered when trying to log in, see Section A.2, “Common Errors When Using MySQL Programs”.
Some MySQL installations allow users to connect as the anonymous (unnamed) user to the server running on the local host. If this is the case on your machine, you should be able to connect to that server by invoking mysql without any options:
shell> mysql
After you have connected successfully, you can disconnect any time
by typing QUIT
(or \q
) at
the mysql>
prompt:
mysql> QUIT
Bye
On Unix, you can also disconnect by pressing Control-D.
Most examples in the following sections assume that you are
connected to the server. They indicate this by the
mysql>
prompt.
Make sure that you are connected to the server, as discussed in the previous section. Doing so does not in itself select any database to work with, but that's okay. At this point, it's more important to find out a little about how to issue queries than to jump right in creating tables, loading data into them, and retrieving data from them. This section describes the basic principles of entering commands, using several queries you can try out to familiarize yourself with how mysql works.
Here's a simple command that asks the server to tell you its
version number and the current date. Type it in as shown here
following the mysql>
prompt and press Enter:
mysql> SELECT VERSION(), CURRENT_DATE;
+----------------+--------------+
| VERSION() | CURRENT_DATE |
+----------------+--------------+
| 5.0.7-beta-Max | 2005-07-11 |
+----------------+--------------+
1 row in set (0.01 sec)
mysql>
This query illustrates several things about mysql:
A command normally consists of an SQL statement followed by a
semicolon. (There are some exceptions where a semicolon may be
omitted. QUIT
, mentioned earlier, is one of
them. We'll get to others later.)
When you issue a command, mysql sends it to
the server for execution and displays the results, then prints
another mysql>
prompt to indicate that
it is ready for another command.
mysql displays query output in tabular form (rows and columns). The first row contains labels for the columns. The rows following are the query results. Normally, column labels are the names of the columns you fetch from database tables. If you're retrieving the value of an expression rather than a table column (as in the example just shown), mysql labels the column using the expression itself.
mysql shows how many rows were returned and how long the query took to execute, which gives you a rough idea of server performance. These values are imprecise because they represent wall clock time (not CPU or machine time), and because they are affected by factors such as server load and network latency. (For brevity, the “rows in set” line is sometimes not shown in the remaining examples in this chapter.)
Keywords may be entered in any lettercase. The following queries are equivalent:
mysql>SELECT VERSION(), CURRENT_DATE;
mysql>select version(), current_date;
mysql>SeLeCt vErSiOn(), current_DATE;
Here's another query. It demonstrates that you can use mysql as a simple calculator:
mysql> SELECT SIN(PI()/4), (4+1)*5;
+------------------+---------+
| SIN(PI()/4) | (4+1)*5 |
+------------------+---------+
| 0.70710678118655 | 25 |
+------------------+---------+
1 row in set (0.02 sec)
The queries shown thus far have been relatively short, single-line statements. You can even enter multiple statements on a single line. Just end each one with a semicolon:
mysql> SELECT VERSION(); SELECT NOW();
+----------------+
| VERSION() |
+----------------+
| 5.0.7-beta-Max |
+----------------+
1 row in set (0.00 sec)
+---------------------+
| NOW() |
+---------------------+
| 2005-07-11 17:59:36 |
+---------------------+
1 row in set (0.00 sec)
A command need not be given all on a single line, so lengthy commands that require several lines are not a problem. mysql determines where your statement ends by looking for the terminating semicolon, not by looking for the end of the input line. (In other words, mysql accepts free-format input: it collects input lines but does not execute them until it sees the semicolon.)
Here's a simple multiple-line statement:
mysql>SELECT
->USER()
->,
->CURRENT_DATE;
+---------------+--------------+ | USER() | CURRENT_DATE | +---------------+--------------+ | jon@localhost | 2005-07-11 | +---------------+--------------+
In this example, notice how the prompt changes from
mysql>
to ->
after you
enter the first line of a multiple-line query. This is how
mysql indicates that it has not yet seen a
complete statement and is waiting for the rest. The prompt is your
friend, because it provides valuable feedback. If you use that
feedback, you can always be aware of what mysql
is waiting for.
If you decide you do not want to execute a command that you are in
the process of entering, cancel it by typing
\c
:
mysql>SELECT
->USER()
->\c
mysql>
Here, too, notice the prompt. It switches back to
mysql>
after you type \c
,
providing feedback to indicate that mysql is
ready for a new command.
The following table shows each of the prompts you may see and summarizes what they mean about the state that mysql is in:
Prompt | Meaning |
mysql> | Ready for new command. |
-> | Waiting for next line of multiple-line command. |
'> | Waiting for next line, waiting for completion of a string that began
with a single quote (‘' ’). |
"> | Waiting for next line, waiting for completion of a string that began
with a double quote (‘" ’). |
`> | Waiting for next line, waiting for completion of an identifier that
began with a backtick
(‘` ’). |
/*> | Waiting for next line, waiting for completion of a comment that began
with /* . |
In the MySQL 5.0 series, the /*>
prompt was
implemented in MySQL 5.0.6.
Multiple-line statements commonly occur by accident when you intend to issue a command on a single line, but forget the terminating semicolon. In this case, mysql waits for more input:
mysql> SELECT USER()
->
If this happens to you (you think you've entered a statement but
the only response is a ->
prompt), most
likely mysql is waiting for the semicolon. If
you don't notice what the prompt is telling you, you might sit
there for a while before realizing what you need to do. Enter a
semicolon to complete the statement, and mysql
executes it:
mysql>SELECT USER()
->;
+---------------+ | USER() | +---------------+ | jon@localhost | +---------------+
The '>
and ">
prompts
occur during string collection (another way of saying that MySQL
is waiting for completion of a string). In MySQL, you can write
strings surrounded by either ‘'
’ or
‘"
’ characters (for example,
'hello'
or "goodbye"
), and
mysql lets you enter strings that span multiple
lines. When you see a '>
or
">
prompt, it means that you have entered a
line containing a string that begins with a
‘'
’ or
‘"
’ quote character, but have not
yet entered the matching quote that terminates the string. This
often indicates that you have inadvertently left out a quote
character. For example:
mysql> SELECT * FROM my_table WHERE name = 'Smith AND age < 30;
'>
If you enter this SELECT
statement, then press
Enter and wait for the result, nothing happens.
Instead of wondering why this query takes so long, notice the clue
provided by the '>
prompt. It tells you that
mysql expects to see the rest of an
unterminated string. (Do you see the error in the statement? The
string 'Smith
is missing the second single
quote mark.)
At this point, what do you do? The simplest thing is to cancel the
command. However, you cannot just type \c
in
this case, because mysql interprets it as part
of the string that it is collecting. Instead, enter the closing
quote character (so mysql knows you've finished
the string), then type \c
:
mysql>SELECT * FROM my_table WHERE name = 'Smith AND age < 30;
'>'\c
mysql>
The prompt changes back to mysql>
,
indicating that mysql is ready for a new
command.
The `>
prompt is similar to the
'>
and ">
prompts, but
indicates that you have begun but not completed a backtick-quoted
identifier.
It is important to know what the '>
,
">
, and `>
prompts
signify, because if you mistakenly enter an unterminated string,
any further lines you type appear to be ignored by
mysql — including a line containing
QUIT
. This can be quite confusing, especially
if you do not know that you need to supply the terminating quote
before you can cancel the current command.
Once you know how to enter commands, you are ready to access a database.
Suppose that you have several pets in your home (your menagerie) and you would like to keep track of various types of information about them. You can do so by creating tables to hold your data and loading them with the desired information. Then you can answer different sorts of questions about your animals by retrieving data from the tables. This section shows you how to:
Create a database
Create a table
Load data into the table
Retrieve data from the table in various ways
Use multiple tables
The menagerie database is simple (deliberately), but it is not difficult to think of real-world situations in which a similar type of database might be used. For example, a database like this could be used by a farmer to keep track of livestock, or by a veterinarian to keep track of patient records. A menagerie distribution containing some of the queries and sample data used in the following sections can be obtained from the MySQL Web site. It is available in both compressed tar file and Zip formats at http://dev.mysql.com/doc/.
Use the SHOW
statement to find out what
databases currently exist on the server:
mysql> SHOW DATABASES;
+----------+
| Database |
+----------+
| mysql |
| test |
| tmp |
+----------+
The list of databases is probably different on your machine, but
the mysql
and test
databases
are likely to be among them. The mysql
database
is required because it describes user access privileges. The
test
database is often provided as a workspace
for users to try things out.
Note that you may not see all databases if you do not have the
SHOW DATABASES
privilege. See
Section 13.5.1.3, “GRANT
Syntax”.
If the test
database exists, try to access it:
mysql> USE test
Database changed
Note that USE
, like QUIT
,
does not require a semicolon. (You can terminate such statements
with a semicolon if you like; it does no harm.) The
USE
statement is special in another way, too:
it must be given on a single line.
You can use the test
database (if you have
access to it) for the examples that follow, but anything you
create in that database can be removed by anyone else with access
to it. For this reason, you should probably ask your MySQL
administrator for permission to use a database of your own.
Suppose that you want to call yours menagerie
.
The administrator needs to execute a command like this:
mysql> GRANT ALL ON menagerie.* TO 'your_mysql_name'@'your_client_host';
where your_mysql_name
is the MySQL user name
assigned to you and your_client_host
is the
host from which you connect to the server.
If the administrator creates your database for you when setting up your permissions, you can begin using it. Otherwise, you need to create it yourself:
mysql> CREATE DATABASE menagerie;
Under Unix, database names are case sensitive (unlike SQL
keywords), so you must always refer to your database as
menagerie
, not as
Menagerie
, MENAGERIE
, or
some other variant. This is also true for table names. (Under
Windows, this restriction does not apply, although you must
refer to databases and tables using the same lettercase
throughout a given query. However, for a variety of reasons, our
recommended best practice is always to use the same lettercase
that was used when the database was created.)
Note: If you get an error such as ERROR 1044 (42000): Access denied for user 'monty'@'localhost' to database 'menagerie' when attempting to create a database, this means that your user account does not have the necessary privileges to do so. Discuss this with the administrator or see Section 5.8, “The MySQL Access Privilege System”.
Creating a database does not select it for use; you must do that
explicitly. To make menagerie
the current
database, use this command:
mysql> USE menagerie;
Database changed
Your database needs to be created only once, but you must select
it for use each time you begin a mysql
session. You can do this by issuing a USE
statement as shown in the example. Alternatively, you can select
the database on the command line when you invoke
mysql. Just specify its name after any
connection parameters that you might need to provide. For
example:
shell>mysql -h
Enter password:host
-uuser
-p menagerie********
Note that menagerie
in the command just shown
is not your password. If you
want to supply your password on the command line after the
-p
option, you must do so with no intervening
space (for example, as -pmypassword
,
not as -p mypassword
).
However, putting your password on the command line is not
recommended, because doing so exposes it to snooping by other
users logged in on your machine.
Creating the database is the easy part, but at this point it's
empty, as SHOW TABLES
tells you:
mysql> SHOW TABLES;
Empty set (0.00 sec)
The harder part is deciding what the structure of your database should be: what tables you need and what columns should be in each of them.
You want a table that contains a record for each of your pets.
This can be called the pet
table, and it
should contain, as a bare minimum, each animal's name. Because
the name by itself is not very interesting, the table should
contain other information. For example, if more than one person
in your family keeps pets, you might want to list each animal's
owner. You might also want to record some basic descriptive
information such as species and sex.
How about age? That might be of interest, but it's not a good thing to store in a database. Age changes as time passes, which means you'd have to update your records often. Instead, it's better to store a fixed value such as date of birth. Then, whenever you need age, you can calculate it as the difference between the current date and the birth date. MySQL provides functions for doing date arithmetic, so this is not difficult. Storing birth date rather than age has other advantages, too:
You can use the database for tasks such as generating reminders for upcoming pet birthdays. (If you think this type of query is somewhat silly, note that it is the same question you might ask in the context of a business database to identify clients to whom you need to send out birthday greetings in the current week or month, for that computer-assisted personal touch.)
You can calculate age in relation to dates other than the current date. For example, if you store death date in the database, you can easily calculate how old a pet was when it died.
You can probably think of other types of information that would
be useful in the pet
table, but the ones
identified so far are sufficient: name, owner, species, sex,
birth, and death.
Use a CREATE TABLE
statement to specify the
layout of your table:
mysql>CREATE TABLE pet (name VARCHAR(20), owner VARCHAR(20),
->species VARCHAR(20), sex CHAR(1), birth DATE, death DATE);
VARCHAR
is a good choice for the
name
, owner
, and
species
columns because the column values
vary in length. The lengths in those column definitions need not
all be the same, and need not be 20
. You can
normally pick any length from 1
to
65535
, whatever seems most reasonable to you.
(Note: Prior to MySQL 5.0.3,
the upper limit was 255.) If you make a poor choice and it turns
out later that you need a longer field, MySQL provides an
ALTER TABLE
statement.
Several types of values can be chosen to represent sex in animal
records, such as 'm'
and
'f'
, or perhaps 'male'
and
'female'
. It is simplest to use the single
characters 'm'
and 'f'
.
The use of the DATE
data type for the
birth
and death
columns is
a fairly obvious choice.
Once you have created a table, SHOW TABLES
should produce some output:
mysql> SHOW TABLES;
+---------------------+
| Tables in menagerie |
+---------------------+
| pet |
+---------------------+
To verify that your table was created the way you expected, use
a DESCRIBE
statement:
mysql> DESCRIBE pet;
+---------+-------------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+---------+-------------+------+-----+---------+-------+
| name | varchar(20) | YES | | NULL | |
| owner | varchar(20) | YES | | NULL | |
| species | varchar(20) | YES | | NULL | |
| sex | char(1) | YES | | NULL | |
| birth | date | YES | | NULL | |
| death | date | YES | | NULL | |
+---------+-------------+------+-----+---------+-------+
You can use DESCRIBE
any time, for example,
if you forget the names of the columns in your table or what
types they have.
For more information about MySQL data types, see Chapter 11, Data Types.
After creating your table, you need to populate it. The
LOAD DATA
and INSERT
statements are useful for this.
Suppose that your pet records can be described as shown here.
(Observe that MySQL expects dates in
'YYYY-MM-DD'
format; this may be different
from what you are used to.)
name | owner | species | sex | birth | death |
Fluffy | Harold | cat | f | 1993-02-04 | |
Claws | Gwen | cat | m | 1994-03-17 | |
Buffy | Harold | dog | f | 1989-05-13 | |
Fang | Benny | dog | m | 1990-08-27 | |
Bowser | Diane | dog | m | 1979-08-31 | 1995-07-29 |
Chirpy | Gwen | bird | f | 1998-09-11 | |
Whistler | Gwen | bird | 1997-12-09 | ||
Slim | Benny | snake | m | 1996-04-29 |
Because you are beginning with an empty table, an easy way to populate it is to create a text file containing a row for each of your animals, then load the contents of the file into the table with a single statement.
You could create a text file pet.txt
containing one record per line, with values separated by tabs,
and given in the order in which the columns were listed in the
CREATE TABLE
statement. For missing values
(such as unknown sexes or death dates for animals that are still
living), you can use NULL
values. To
represent these in your text file, use \N
(backslash, capital-N). For example, the record for Whistler the
bird would look like this (where the whitespace between values
is a single tab character):
name | owner | species | sex | birth | death |
Whistler | Gwen | bird | \N | 1997-12-09 | \N |
To load the text file pet.txt
into the
pet
table, use this command:
mysql> LOAD DATA LOCAL INFILE '/path/pet.txt' INTO TABLE pet;
Note that if you created the file on Windows with an editor that
uses \r\n
as a line terminator, you should
use:
mysql>LOAD DATA LOCAL INFILE '/path/pet.txt' INTO TABLE pet
->LINES TERMINATED BY '\r\n';
(On an Apple machine running OS X, you would likely want to use
LINES TERMINATED BY '\r'
.)
You can specify the column value separator and end of line
marker explicitly in the LOAD DATA
statement
if you wish, but the defaults are tab and linefeed. These are
sufficient for the statement to read the file
pet.txt
properly.
If the statement fails, it is likely that your MySQL
installation does not have local file capability enabled by
default. See Section 5.7.4, “Security Issues with LOAD DATA LOCAL
”, for information
on how to change this.
When you want to add new records one at a time, the
INSERT
statement is useful. In its simplest
form, you supply values for each column, in the order in which
the columns were listed in the CREATE TABLE
statement. Suppose that Diane gets a new hamster named
“Puffball.” You could add a new record using an
INSERT
statement like this:
mysql>INSERT INTO pet
->VALUES ('Puffball','Diane','hamster','f','1999-03-30',NULL);
Note that string and date values are specified as quoted strings
here. Also, with INSERT
, you can insert
NULL
directly to represent a missing value.
You do not use \N
like you do with
LOAD DATA
.
From this example, you should be able to see that there would be
a lot more typing involved to load your records initially using
several INSERT
statements rather than a
single LOAD DATA
statement.
The SELECT
statement is used to pull
information from a table. The general form of the statement is:
SELECTwhat_to_select
FROMwhich_table
WHEREconditions_to_satisfy
;
what_to_select
indicates what you
want to see. This can be a list of columns, or
*
to indicate “all columns.”
which_table
indicates the table from
which you want to retrieve data. The WHERE
clause is optional. If it is present,
conditions_to_satisfy
specifies one
or more conditions that rows must satisfy to qualify for
retrieval.
The simplest form of SELECT
retrieves
everything from a table:
mysql> SELECT * FROM pet;
+----------+--------+---------+------+------------+------------+
| name | owner | species | sex | birth | death |
+----------+--------+---------+------+------------+------------+
| Fluffy | Harold | cat | f | 1993-02-04 | NULL |
| Claws | Gwen | cat | m | 1994-03-17 | NULL |
| Buffy | Harold | dog | f | 1989-05-13 | NULL |
| Fang | Benny | dog | m | 1990-08-27 | NULL |
| Bowser | Diane | dog | m | 1979-08-31 | 1995-07-29 |
| Chirpy | Gwen | bird | f | 1998-09-11 | NULL |
| Whistler | Gwen | bird | NULL | 1997-12-09 | NULL |
| Slim | Benny | snake | m | 1996-04-29 | NULL |
| Puffball | Diane | hamster | f | 1999-03-30 | NULL |
+----------+--------+---------+------+------------+------------+
This form of SELECT
is useful if you want
to review your entire table, for example, after you've just
loaded it with your initial dataset. For example, you may
happen to think that the birth date for Bowser doesn't seem
quite right. Consulting your original pedigree papers, you
find that the correct birth year should be 1989, not 1979.
There are least two ways to fix this:
Edit the file pet.txt
to correct the
error, then empty the table and reload it using
DELETE
and LOAD
DATA
:
mysql>DELETE FROM pet;
mysql>LOAD DATA LOCAL INFILE 'pet.txt' INTO TABLE pet;
However, if you do this, you must also re-enter the record for Puffball.
Fix only the erroneous record with an
UPDATE
statement:
mysql> UPDATE pet SET birth = '1989-08-31' WHERE name = 'Bowser';
The UPDATE
changes only the record in
question and does not require you to reload the table.
As shown in the preceding section, it is easy to retrieve an
entire table. Just omit the WHERE
clause
from the SELECT
statement. But typically
you don't want to see the entire table, particularly when it
becomes large. Instead, you're usually more interested in
answering a particular question, in which case you specify
some constraints on the information you want. Let's look at
some selection queries in terms of questions about your pets
that they answer.
You can select only particular rows from your table. For example, if you want to verify the change that you made to Bowser's birth date, select Bowser's record like this:
mysql> SELECT * FROM pet WHERE name = 'Bowser';
+--------+-------+---------+------+------------+------------+
| name | owner | species | sex | birth | death |
+--------+-------+---------+------+------------+------------+
| Bowser | Diane | dog | m | 1989-08-31 | 1995-07-29 |
+--------+-------+---------+------+------------+------------+
The output confirms that the year is correctly recorded as 1989, not 1979.
String comparisons normally are case-insensitive, so you can
specify the name as 'bowser'
,
'BOWSER'
, and so forth. The query result is
the same.
You can specify conditions on any column, not just
name
. For example, if you want to know
which animals were born during or after 1998, test the
birth
column:
mysql> SELECT * FROM pet WHERE birth >= '1998-1-1';
+----------+-------+---------+------+------------+-------+
| name | owner | species | sex | birth | death |
+----------+-------+---------+------+------------+-------+
| Chirpy | Gwen | bird | f | 1998-09-11 | NULL |
| Puffball | Diane | hamster | f | 1999-03-30 | NULL |
+----------+-------+---------+------+------------+-------+
You can combine conditions, for example, to locate female dogs:
mysql> SELECT * FROM pet WHERE species = 'dog' AND sex = 'f';
+-------+--------+---------+------+------------+-------+
| name | owner | species | sex | birth | death |
+-------+--------+---------+------+------------+-------+
| Buffy | Harold | dog | f | 1989-05-13 | NULL |
+-------+--------+---------+------+------------+-------+
The preceding query uses the AND
logical
operator. There is also an OR
operator:
mysql> SELECT * FROM pet WHERE species = 'snake' OR species = 'bird';
+----------+-------+---------+------+------------+-------+
| name | owner | species | sex | birth | death |
+----------+-------+---------+------+------------+-------+
| Chirpy | Gwen | bird | f | 1998-09-11 | NULL |
| Whistler | Gwen | bird | NULL | 1997-12-09 | NULL |
| Slim | Benny | snake | m | 1996-04-29 | NULL |
+----------+-------+---------+------+------------+-------+
AND
and OR
may be
intermixed, although AND
has higher
precedence than OR
. If you use both
operators, it is a good idea to use parentheses to indicate
explicitly how conditions should be grouped:
mysql>SELECT * FROM pet WHERE (species = 'cat' AND sex = 'm')
->OR (species = 'dog' AND sex = 'f');
+-------+--------+---------+------+------------+-------+ | name | owner | species | sex | birth | death | +-------+--------+---------+------+------------+-------+ | Claws | Gwen | cat | m | 1994-03-17 | NULL | | Buffy | Harold | dog | f | 1989-05-13 | NULL | +-------+--------+---------+------+------------+-------+
If you do not want to see entire rows from your table, just
name the columns in which you are interested, separated by
commas. For example, if you want to know when your animals
were born, select the name
and
birth
columns:
mysql> SELECT name, birth FROM pet;
+----------+------------+
| name | birth |
+----------+------------+
| Fluffy | 1993-02-04 |
| Claws | 1994-03-17 |
| Buffy | 1989-05-13 |
| Fang | 1990-08-27 |
| Bowser | 1989-08-31 |
| Chirpy | 1998-09-11 |
| Whistler | 1997-12-09 |
| Slim | 1996-04-29 |
| Puffball | 1999-03-30 |
+----------+------------+
To find out who owns pets, use this query:
mysql> SELECT owner FROM pet;
+--------+
| owner |
+--------+
| Harold |
| Gwen |
| Harold |
| Benny |
| Diane |
| Gwen |
| Gwen |
| Benny |
| Diane |
+--------+
Notice that the query simply retrieves the
owner
column from each record, and some of
them appear more than once. To minimize the output, retrieve
each unique output record just once by adding the keyword
DISTINCT
:
mysql> SELECT DISTINCT owner FROM pet;
+--------+
| owner |
+--------+
| Benny |
| Diane |
| Gwen |
| Harold |
+--------+
You can use a WHERE
clause to combine row
selection with column selection. For example, to get birth
dates for dogs and cats only, use this query:
mysql>SELECT name, species, birth FROM pet
->WHERE species = 'dog' OR species = 'cat';
+--------+---------+------------+ | name | species | birth | +--------+---------+------------+ | Fluffy | cat | 1993-02-04 | | Claws | cat | 1994-03-17 | | Buffy | dog | 1989-05-13 | | Fang | dog | 1990-08-27 | | Bowser | dog | 1989-08-31 | +--------+---------+------------+
You may have noticed in the preceding examples that the result
rows are displayed in no particular order. It's often easier
to examine query output when the rows are sorted in some
meaningful way. To sort a result, use an ORDER
BY
clause.
Here are animal birthdays, sorted by date:
mysql> SELECT name, birth FROM pet ORDER BY birth;
+----------+------------+
| name | birth |
+----------+------------+
| Buffy | 1989-05-13 |
| Bowser | 1989-08-31 |
| Fang | 1990-08-27 |
| Fluffy | 1993-02-04 |
| Claws | 1994-03-17 |
| Slim | 1996-04-29 |
| Whistler | 1997-12-09 |
| Chirpy | 1998-09-11 |
| Puffball | 1999-03-30 |
+----------+------------+
On character type columns, sorting — like all other
comparison operations — is normally performed in a
case-insensitive fashion. This means that the order is
undefined for columns that are identical except for their
case. You can force a case-sensitive sort for a column by
using BINARY
like so: ORDER BY
BINARY
.
col_name
The default sort order is ascending, with smallest values
first. To sort in reverse (descending) order, add the
DESC
keyword to the name of the column you
are sorting by:
mysql> SELECT name, birth FROM pet ORDER BY birth DESC;
+----------+------------+
| name | birth |
+----------+------------+
| Puffball | 1999-03-30 |
| Chirpy | 1998-09-11 |
| Whistler | 1997-12-09 |
| Slim | 1996-04-29 |
| Claws | 1994-03-17 |
| Fluffy | 1993-02-04 |
| Fang | 1990-08-27 |
| Bowser | 1989-08-31 |
| Buffy | 1989-05-13 |
+----------+------------+
You can sort on multiple columns, and you can sort different columns in different directions. For example, to sort by type of animal in ascending order, then by birth date within animal type in descending order (youngest animals first), use the following query:
mysql>SELECT name, species, birth FROM pet
->ORDER BY species, birth DESC;
+----------+---------+------------+ | name | species | birth | +----------+---------+------------+ | Chirpy | bird | 1998-09-11 | | Whistler | bird | 1997-12-09 | | Claws | cat | 1994-03-17 | | Fluffy | cat | 1993-02-04 | | Fang | dog | 1990-08-27 | | Bowser | dog | 1989-08-31 | | Buffy | dog | 1989-05-13 | | Puffball | hamster | 1999-03-30 | | Slim | snake | 1996-04-29 | +----------+---------+------------+
Note that the DESC
keyword applies only to
the column name immediately preceding it
(birth
); it does not affect the
species
column sort order.
MySQL provides several functions that you can use to perform calculations on dates, for example, to calculate ages or extract parts of dates.
To determine how many years old each of your pets is, compute the difference in the year part of the current date and the birth date, then subtract one if the current date occurs earlier in the calendar year than the birth date. The following query shows, for each pet, the birth date, the current date, and the age in years.
mysql>SELECT name, birth, CURDATE(),
->(YEAR(CURDATE())-YEAR(birth))
->- (RIGHT(CURDATE(),5)<RIGHT(birth,5))
->AS age
->FROM pet;
+----------+------------+------------+------+ | name | birth | CURDATE() | age | +----------+------------+------------+------+ | Fluffy | 1993-02-04 | 2003-08-19 | 10 | | Claws | 1994-03-17 | 2003-08-19 | 9 | | Buffy | 1989-05-13 | 2003-08-19 | 14 | | Fang | 1990-08-27 | 2003-08-19 | 12 | | Bowser | 1989-08-31 | 2003-08-19 | 13 | | Chirpy | 1998-09-11 | 2003-08-19 | 4 | | Whistler | 1997-12-09 | 2003-08-19 | 5 | | Slim | 1996-04-29 | 2003-08-19 | 7 | | Puffball | 1999-03-30 | 2003-08-19 | 4 | +----------+------------+------------+------+
Here, YEAR()
pulls out the year part of a
date and RIGHT()
pulls off the rightmost
five characters that represent the MM-DD
(calendar year) part of the date. The part of the expression
that compares the MM-DD
values evaluates to
1 or 0, which adjusts the year difference down a year if
CURDATE()
occurs earlier in the year than
birth
. The full expression is somewhat
ungainly, so an alias
(age
) is used to make the output column
label more meaningful.
The query works, but the result could be scanned more easily
if the rows were presented in some order. This can be done by
adding an ORDER BY name
clause to sort the
output by name:
mysql>SELECT name, birth, CURDATE(),
->(YEAR(CURDATE())-YEAR(birth))
->- (RIGHT(CURDATE(),5)<RIGHT(birth,5))
->AS age
->FROM pet ORDER BY name;
+----------+------------+------------+------+ | name | birth | CURDATE() | age | +----------+------------+------------+------+ | Bowser | 1989-08-31 | 2003-08-19 | 13 | | Buffy | 1989-05-13 | 2003-08-19 | 14 | | Chirpy | 1998-09-11 | 2003-08-19 | 4 | | Claws | 1994-03-17 | 2003-08-19 | 9 | | Fang | 1990-08-27 | 2003-08-19 | 12 | | Fluffy | 1993-02-04 | 2003-08-19 | 10 | | Puffball | 1999-03-30 | 2003-08-19 | 4 | | Slim | 1996-04-29 | 2003-08-19 | 7 | | Whistler | 1997-12-09 | 2003-08-19 | 5 | +----------+------------+------------+------+
To sort the output by age
rather than
name
, just use a different ORDER
BY
clause:
mysql>SELECT name, birth, CURDATE(),
->(YEAR(CURDATE())-YEAR(birth))
->- (RIGHT(CURDATE(),5)<RIGHT(birth,5))
->AS age
->FROM pet ORDER BY age;
+----------+------------+------------+------+ | name | birth | CURDATE() | age | +----------+------------+------------+------+ | Chirpy | 1998-09-11 | 2003-08-19 | 4 | | Puffball | 1999-03-30 | 2003-08-19 | 4 | | Whistler | 1997-12-09 | 2003-08-19 | 5 | | Slim | 1996-04-29 | 2003-08-19 | 7 | | Claws | 1994-03-17 | 2003-08-19 | 9 | | Fluffy | 1993-02-04 | 2003-08-19 | 10 | | Fang | 1990-08-27 | 2003-08-19 | 12 | | Bowser | 1989-08-31 | 2003-08-19 | 13 | | Buffy | 1989-05-13 | 2003-08-19 | 14 | +----------+------------+------------+------+
A similar query can be used to determine age at death for
animals that have died. You determine which animals these are
by checking whether the death
value is
NULL
. Then, for those with
non-NULL
values, compute the difference
between the death
and
birth
values:
mysql>SELECT name, birth, death,
->(YEAR(death)-YEAR(birth)) - (RIGHT(death,5)<RIGHT(birth,5))
->AS age
->FROM pet WHERE death IS NOT NULL ORDER BY age;
+--------+------------+------------+------+ | name | birth | death | age | +--------+------------+------------+------+ | Bowser | 1989-08-31 | 1995-07-29 | 5 | +--------+------------+------------+------+
The query uses death IS NOT NULL
rather
than death <> NULL
because
NULL
is a special value that cannot be
compared using the usual comparison operators. This is
discussed later. See Section 3.3.4.6, “Working with NULL
Values”.
What if you want to know which animals have birthdays next
month? For this type of calculation, year and day are
irrelevant; you simply want to extract the month part of the
birth
column. MySQL provides several
functions for extracting parts of dates, such as
YEAR()
, MONTH()
, and
DAYOFMONTH()
. MONTH()
is
the appropriate function here. To see how it works, run a
simple query that displays the value of both
birth
and MONTH(birth)
:
mysql> SELECT name, birth, MONTH(birth) FROM pet;
+----------+------------+--------------+
| name | birth | MONTH(birth) |
+----------+------------+--------------+
| Fluffy | 1993-02-04 | 2 |
| Claws | 1994-03-17 | 3 |
| Buffy | 1989-05-13 | 5 |
| Fang | 1990-08-27 | 8 |
| Bowser | 1989-08-31 | 8 |
| Chirpy | 1998-09-11 | 9 |
| Whistler | 1997-12-09 | 12 |
| Slim | 1996-04-29 | 4 |
| Puffball | 1999-03-30 | 3 |
+----------+------------+--------------+
Finding animals with birthdays in the upcoming month is also
simple. Suppose that the current month is April. Then the
month value is 4
and you can look for
animals born in May (month 5
) like this:
mysql> SELECT name, birth FROM pet WHERE MONTH(birth) = 5;
+-------+------------+
| name | birth |
+-------+------------+
| Buffy | 1989-05-13 |
+-------+------------+
There is a small complication if the current month is
December. You cannot merely add one to the month number
(12
) and look for animals born in month
13
, because there is no such month.
Instead, you look for animals born in January (month
1
).
You can write the query so that it works no matter what the
current month is, so that you do not have to use the number
for a particular month. DATE_ADD()
allows
you to add a time interval to a given date. If you add a month
to the value of CURDATE()
, then extract the
month part with MONTH()
, the result
produces the month in which to look for birthdays:
mysql>SELECT name, birth FROM pet
->WHERE MONTH(birth) = MONTH(DATE_ADD(CURDATE(),INTERVAL 1 MONTH));
A different way to accomplish the same task is to add
1
to get the next month after the current
one after using the modulo function (MOD
)
to wrap the month value to 0
if it is
currently 12
:
mysql>SELECT name, birth FROM pet
->WHERE MONTH(birth) = MOD(MONTH(CURDATE()), 12) + 1;
Note that MONTH
returns a number between
1
and 12
. And
MOD(something,12)
returns a number between
0
and 11
. So the
addition has to be after the MOD()
,
otherwise we would go from November (11
) to
January (1
).
The NULL
value can be surprising until you
get used to it. Conceptually, NULL
means
“a missing unknown value” and it is treated
somewhat differently from other values. To test for
NULL
, you cannot use the arithmetic
comparison operators such as =
,
<
, or <>
. To
demonstrate this for yourself, try the following query:
mysql> SELECT 1 = NULL, 1 <> NULL, 1 < NULL, 1 > NULL;
+----------+-----------+----------+----------+
| 1 = NULL | 1 <> NULL | 1 < NULL | 1 > NULL |
+----------+-----------+----------+----------+
| NULL | NULL | NULL | NULL |
+----------+-----------+----------+----------+
Clearly you get no meaningful results from these comparisons.
Use the IS NULL
and IS NOT
NULL
operators instead:
mysql> SELECT 1 IS NULL, 1 IS NOT NULL;
+-----------+---------------+
| 1 IS NULL | 1 IS NOT NULL |
+-----------+---------------+
| 0 | 1 |
+-----------+---------------+
Note that in MySQL, 0
or
NULL
means false and anything else means
true. The default truth value from a boolean operation is
1
.
This special treatment of NULL
is why, in
the previous section, it was necessary to determine which
animals are no longer alive using death IS NOT
NULL
instead of death <>
NULL
.
Two NULL
values are regarded as equal in a
GROUP BY
.
When doing an ORDER BY
,
NULL
values are presented first if you do
ORDER BY ... ASC
and last if you do
ORDER BY ... DESC
.
A common error when working with NULL
is to
assume that it is not possible to insert a zero or an empty
string into a column defined as NOT NULL
,
but this is not the case. These are in fact values, whereas
NULL
means “not having a
value.” You can test this easily enough by using
IS
[NOT
]
NULL
as shown:
mysql> SELECT 0 IS NULL, 0 IS NOT NULL, '' IS NULL, '' IS NOT NULL;
+-----------+---------------+------------+----------------+
| 0 IS NULL | 0 IS NOT NULL | '' IS NULL | '' IS NOT NULL |
+-----------+---------------+------------+----------------+
| 0 | 1 | 0 | 1 |
+-----------+---------------+------------+----------------+
Thus it is entirely possible to insert a zero or empty string
into a NOT NULL
column, as these are in
fact NOT NULL
. See
Section A.5.3, “Problems with NULL
Values”.
MySQL provides standard SQL pattern matching as well as a form of pattern matching based on extended regular expressions similar to those used by Unix utilities such as vi, grep, and sed.
SQL pattern matching allows you to use
‘_
’ to match any single
character and ‘%
’ to match an
arbitrary number of characters (including zero characters). In
MySQL, SQL patterns are case-insensitive by default. Some
examples are shown here. Note that you do not use
=
or <>
when you
use SQL patterns; use the LIKE
or
NOT LIKE
comparison operators instead.
To find names beginning with
‘b
’:
mysql> SELECT * FROM pet WHERE name LIKE 'b%';
+--------+--------+---------+------+------------+------------+
| name | owner | species | sex | birth | death |
+--------+--------+---------+------+------------+------------+
| Buffy | Harold | dog | f | 1989-05-13 | NULL |
| Bowser | Diane | dog | m | 1989-08-31 | 1995-07-29 |
+--------+--------+---------+------+------------+------------+
To find names ending with ‘fy
’:
mysql> SELECT * FROM pet WHERE name LIKE '%fy';
+--------+--------+---------+------+------------+-------+
| name | owner | species | sex | birth | death |
+--------+--------+---------+------+------------+-------+
| Fluffy | Harold | cat | f | 1993-02-04 | NULL |
| Buffy | Harold | dog | f | 1989-05-13 | NULL |
+--------+--------+---------+------+------------+-------+
To find names containing a ‘w
’:
mysql> SELECT * FROM pet WHERE name LIKE '%w%';
+----------+-------+---------+------+------------+------------+
| name | owner | species | sex | birth | death |
+----------+-------+---------+------+------------+------------+
| Claws | Gwen | cat | m | 1994-03-17 | NULL |
| Bowser | Diane | dog | m | 1989-08-31 | 1995-07-29 |
| Whistler | Gwen | bird | NULL | 1997-12-09 | NULL |
+----------+-------+---------+------+------------+------------+
To find names containing exactly five characters, use five
instances of the ‘_
’ pattern
character:
mysql> SELECT * FROM pet WHERE name LIKE '_____';
+-------+--------+---------+------+------------+-------+
| name | owner | species | sex | birth | death |
+-------+--------+---------+------+------------+-------+
| Claws | Gwen | cat | m | 1994-03-17 | NULL |
| Buffy | Harold | dog | f | 1989-05-13 | NULL |
+-------+--------+---------+------+------------+-------+
The other type of pattern matching provided by MySQL uses
extended regular expressions. When you test for a match for
this type of pattern, use the REGEXP
and
NOT REGEXP
operators (or
RLIKE
and NOT RLIKE
,
which are synonyms).
Some characteristics of extended regular expressions are:
‘.
’ matches any single
character.
A character class ‘[...]
’
matches any character within the brackets. For example,
‘[abc]
’ matches
‘a
’,
‘b
’, or
‘c
’. To name a range of
characters, use a dash.
‘[a-z]
’ matches any letter,
whereas ‘[0-9]
’ matches any
digit.
‘*
’ matches zero or more
instances of the thing preceding it. For example,
‘x*
’ matches any number of
‘x
’ characters,
‘[0-9]*
’ matches any number
of digits, and ‘.*
’ matches
any number of anything.
A REGEXP
pattern match succeeds if the
pattern matches anywhere in the value being tested. (This
differs from a LIKE
pattern match,
which succeeds only if the pattern matches the entire
value.)
To anchor a pattern so that it must match the beginning or
end of the value being tested, use
‘^
’ at the beginning or
‘$
’ at the end of the
pattern.
To demonstrate how extended regular expressions work, the
LIKE
queries shown previously are rewritten
here to use REGEXP
.
To find names beginning with
‘b
’, use
‘^
’ to match the beginning of
the name:
mysql> SELECT * FROM pet WHERE name REGEXP '^b';
+--------+--------+---------+------+------------+------------+
| name | owner | species | sex | birth | death |
+--------+--------+---------+------+------------+------------+
| Buffy | Harold | dog | f | 1989-05-13 | NULL |
| Bowser | Diane | dog | m | 1989-08-31 | 1995-07-29 |
+--------+--------+---------+------+------------+------------+
If you really want to force a REGEXP
comparison to be case sensitive, use the
BINARY
keyword to make one of the strings a
binary string. This query matches only lowercase
‘b
’ at the beginning of a name:
mysql> SELECT * FROM pet WHERE name REGEXP BINARY '^b';
To find names ending with ‘fy
’,
use ‘$
’ to match the end of the
name:
mysql> SELECT * FROM pet WHERE name REGEXP 'fy$';
+--------+--------+---------+------+------------+-------+
| name | owner | species | sex | birth | death |
+--------+--------+---------+------+------------+-------+
| Fluffy | Harold | cat | f | 1993-02-04 | NULL |
| Buffy | Harold | dog | f | 1989-05-13 | NULL |
+--------+--------+---------+------+------------+-------+
To find names containing a ‘w
’,
use this query:
mysql> SELECT * FROM pet WHERE name REGEXP 'w';
+----------+-------+---------+------+------------+------------+
| name | owner | species | sex | birth | death |
+----------+-------+---------+------+------------+------------+
| Claws | Gwen | cat | m | 1994-03-17 | NULL |
| Bowser | Diane | dog | m | 1989-08-31 | 1995-07-29 |
| Whistler | Gwen | bird | NULL | 1997-12-09 | NULL |
+----------+-------+---------+------+------------+------------+
Because a regular expression pattern matches if it occurs anywhere in the value, it is not necessary in the previous query to put a wildcard on either side of the pattern to get it to match the entire value like it would be if you used an SQL pattern.
To find names containing exactly five characters, use
‘^
’ and
‘$
’ to match the beginning and
end of the name, and five instances of
‘.
’ in between:
mysql> SELECT * FROM pet WHERE name REGEXP '^.....$';
+-------+--------+---------+------+------------+-------+
| name | owner | species | sex | birth | death |
+-------+--------+---------+------+------------+-------+
| Claws | Gwen | cat | m | 1994-03-17 | NULL |
| Buffy | Harold | dog | f | 1989-05-13 | NULL |
+-------+--------+---------+------+------------+-------+
You could also write the previous query using the
{
(“repeat-n
}n
-times”)
operator:
mysql> SELECT * FROM pet WHERE name REGEXP '^.{5}$';
+-------+--------+---------+------+------------+-------+
| name | owner | species | sex | birth | death |
+-------+--------+---------+------+------------+-------+
| Claws | Gwen | cat | m | 1994-03-17 | NULL |
| Buffy | Harold | dog | f | 1989-05-13 | NULL |
+-------+--------+---------+------+------------+-------+
Appendix G, Regular Expressions, provides more information about the syntax for regular expressions.
Databases are often used to answer the question, “How often does a certain type of data occur in a table?” For example, you might want to know how many pets you have, or how many pets each owner has, or you might want to perform various kinds of census operations on your animals.
Counting the total number of animals you have is the same
question as “How many rows are in the
pet
table?” because there is one
record per pet. COUNT(*)
counts the number
of rows, so the query to count your animals looks like this:
mysql> SELECT COUNT(*) FROM pet;
+----------+
| COUNT(*) |
+----------+
| 9 |
+----------+
Earlier, you retrieved the names of the people who owned pets.
You can use COUNT()
if you want to find out
how many pets each owner has:
mysql> SELECT owner, COUNT(*) FROM pet GROUP BY owner;
+--------+----------+
| owner | COUNT(*) |
+--------+----------+
| Benny | 2 |
| Diane | 2 |
| Gwen | 3 |
| Harold | 2 |
+--------+----------+
Note the use of GROUP BY
to group all
records for each owner
. Without it, all you
get is an error message:
mysql> SELECT owner, COUNT(*) FROM pet;
ERROR 1140 (42000): Mixing of GROUP columns (MIN(),MAX(),COUNT(),...)
with no GROUP columns is illegal if there is no GROUP BY clause
COUNT()
and GROUP BY
are
useful for characterizing your data in various ways. The
following examples show different ways to perform animal
census operations.
Number of animals per species:
mysql> SELECT species, COUNT(*) FROM pet GROUP BY species;
+---------+----------+
| species | COUNT(*) |
+---------+----------+
| bird | 2 |
| cat | 2 |
| dog | 3 |
| hamster | 1 |
| snake | 1 |
+---------+----------+
Number of animals per sex:
mysql> SELECT sex, COUNT(*) FROM pet GROUP BY sex;
+------+----------+
| sex | COUNT(*) |
+------+----------+
| NULL | 1 |
| f | 4 |
| m | 4 |
+------+----------+
(In this output, NULL
indicates that the
sex is unknown.)
Number of animals per combination of species and sex:
mysql> SELECT species, sex, COUNT(*) FROM pet GROUP BY species, sex;
+---------+------+----------+
| species | sex | COUNT(*) |
+---------+------+----------+
| bird | NULL | 1 |
| bird | f | 1 |
| cat | f | 1 |
| cat | m | 1 |
| dog | f | 1 |
| dog | m | 2 |
| hamster | f | 1 |
| snake | m | 1 |
+---------+------+----------+
You need not retrieve an entire table when you use
COUNT()
. For example, the previous query,
when performed just on dogs and cats, looks like this:
mysql>SELECT species, sex, COUNT(*) FROM pet
->WHERE species = 'dog' OR species = 'cat'
->GROUP BY species, sex;
+---------+------+----------+ | species | sex | COUNT(*) | +---------+------+----------+ | cat | f | 1 | | cat | m | 1 | | dog | f | 1 | | dog | m | 2 | +---------+------+----------+
Or, if you wanted the number of animals per sex only for animals whose sex is known:
mysql>SELECT species, sex, COUNT(*) FROM pet
->WHERE sex IS NOT NULL
->GROUP BY species, sex;
+---------+------+----------+ | species | sex | COUNT(*) | +---------+------+----------+ | bird | f | 1 | | cat | f | 1 | | cat | m | 1 | | dog | f | 1 | | dog | m | 2 | | hamster | f | 1 | | snake | m | 1 | +---------+------+----------+
The pet
table keeps track of which pets you
have. If you want to record other information about them, such
as events in their lives like visits to the vet or when
litters are born, you need another table. What should this
table look like? It needs:
To contain the pet name so that you know which animal each event pertains to.
A date so that you know when the event occurred.
A field to describe the event.
An event type field, if you want to be able to categorize events.
Given these considerations, the CREATE
TABLE
statement for the event
table might look like this:
mysql>CREATE TABLE event (name VARCHAR(20), date DATE,
->type VARCHAR(15), remark VARCHAR(255));
As with the pet
table, it's easiest to load
the initial records by creating a tab-delimited text file
containing the information:
name | date | type | remark |
Fluffy | 1995-05-15 | litter | 4 kittens, 3 female, 1 male |
Buffy | 1993-06-23 | litter | 5 puppies, 2 female, 3 male |
Buffy | 1994-06-19 | litter | 3 puppies, 3 female |
Chirpy | 1999-03-21 | vet | needed beak straightened |
Slim | 1997-08-03 | vet | broken rib |
Bowser | 1991-10-12 | kennel | |
Fang | 1991-10-12 | kennel | |
Fang | 1998-08-28 | birthday | Gave him a new chew toy |
Claws | 1998-03-17 | birthday | Gave him a new flea collar |
Whistler | 1998-12-09 | birthday | First birthday |
Load the records like this:
mysql> LOAD DATA LOCAL INFILE 'event.txt' INTO TABLE event;
Based on what you have learned from the queries that you have
run on the pet
table, you should be able to
perform retrievals on the records in the
event
table; the principles are the same.
But when is the event
table by itself
insufficient to answer questions you might ask?
Suppose that you want to find out the ages at which each pet
had its litters. We saw earlier how to calculate ages from two
dates. The litter date of the mother is in the
event
table, but to calculate her age on
that date you need her birth date, which is stored in the
pet
table. This means the query requires
both tables:
mysql>SELECT pet.name,
->(YEAR(date)-YEAR(birth)) - (RIGHT(date,5)<RIGHT(birth,5)) AS age,
->remark
->FROM pet INNER JOIN event
->ON pet.name = event.name
->WHERE event.type = 'litter';
+--------+------+-----------------------------+ | name | age | remark | +--------+------+-----------------------------+ | Fluffy | 2 | 4 kittens, 3 female, 1 male | | Buffy | 4 | 5 puppies, 2 female, 3 male | | Buffy | 5 | 3 puppies, 3 female | +--------+------+-----------------------------+
There are several things to note about this query:
The FROM
clause joins two tables
because the query needs to pull information from both of
them.
When combining (joining) information from multiple tables,
you need to specify how records in one table can be
matched to records in the other. This is easy because they
both have a name
column. The query uses
WHERE
clause to match up records in the
two tables based on the name
values.
The query uses an INNER JOIN
to combine
the tables. An INNER JOIN
allows for
rows from either table to appear in the result if and only
if both tables meet the conditions specified in the
ON
clause. In this example, the
ON
clause specifies that the
name
column in the
pet
table must match the
name
column in the
event
table. If a name appears in one
table but not the other, the row will not appear in the
result because the condition in the ON
clause fails.
Because the name
column occurs in both
tables, you must be specific about which table you mean
when referring to the column. This is done by prepending
the table name to the column name.
You need not have two different tables to perform a join.
Sometimes it is useful to join a table to itself, if you want
to compare records in a table to other records in that same
table. For example, to find breeding pairs among your pets,
you can join the pet
table with itself to
produce candidate pairs of males and females of like species:
mysql>SELECT p1.name, p1.sex, p2.name, p2.sex, p1.species
->FROM pet AS p1 INNER JOIN pet AS p2
->ON p1.species = p2.species AND p1.sex = 'f' AND p2.sex = 'm';
+--------+------+--------+------+---------+ | name | sex | name | sex | species | +--------+------+--------+------+---------+ | Fluffy | f | Claws | m | cat | | Buffy | f | Fang | m | dog | | Buffy | f | Bowser | m | dog | +--------+------+--------+------+---------+
In this query, we specify aliases for the table name to refer to the columns and keep straight which instance of the table each column reference is associated with.
What if you forget the name of a database or table, or what the structure of a given table is (for example, what its columns are called)? MySQL addresses this problem through several statements that provide information about the databases and tables it supports.
You have previously seen SHOW DATABASES
, which
lists the databases managed by the server. To find out which
database is currently selected, use the
DATABASE()
function:
mysql> SELECT DATABASE();
+------------+
| DATABASE() |
+------------+
| menagerie |
+------------+
If you have not yet selected any database, the result is
NULL
.
To find out what tables the default database contains (for example, when you are not sure about the name of a table), use this command:
mysql> SHOW TABLES;
+---------------------+
| Tables in menagerie |
+---------------------+
| event |
| pet |
+---------------------+
If you want to find out about the structure of a table, the
DESCRIBE
command is useful; it displays
information about each of a table's columns:
mysql> DESCRIBE pet;
+---------+-------------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+---------+-------------+------+-----+---------+-------+
| name | varchar(20) | YES | | NULL | |
| owner | varchar(20) | YES | | NULL | |
| species | varchar(20) | YES | | NULL | |
| sex | char(1) | YES | | NULL | |
| birth | date | YES | | NULL | |
| death | date | YES | | NULL | |
+---------+-------------+------+-----+---------+-------+
Field
indicates the column name,
Type
is the data type for the column,
NULL
indicates whether the column can contain
NULL
values, Key
indicates
whether the column is indexed, and Default
specifies the column's default value.
If you have indexes on a table, SHOW INDEX FROM
produces information
about them.
tbl_name
In the previous sections, you used mysql interactively to enter queries and view the results. You can also run mysql in batch mode. To do this, put the commands you want to run in a file, then tell mysql to read its input from the file:
shell> mysql < batch-file
If you are running mysql under Windows and have some special characters in the file that cause problems, you can do this:
C:\> mysql -e "source batch-file
"
If you need to specify connection parameters on the command line, the command might look like this:
shell>mysql -h
Enter password:host
-uuser
-p <batch-file
********
When you use mysql this way, you are creating a script file, then executing the script.
If you want the script to continue even if some of the statements
in it produce errors, you should use the --force
command-line option.
Why use a script? Here are a few reasons:
If you run a query repeatedly (say, every day or every week), making it a script allows you to avoid retyping it each time you execute it.
You can generate new queries from existing ones that are similar by copying and editing script files.
Batch mode can also be useful while you're developing a query, particularly for multiple-line commands or multiple-statement sequences of commands. If you make a mistake, you don't have to retype everything. Just edit your script to correct the error, then tell mysql to execute it again.
If you have a query that produces a lot of output, you can run the output through a pager rather than watching it scroll off the top of your screen:
shell> mysql < batch-file
| more
You can catch the output in a file for further processing:
shell> mysql < batch-file
> mysql.out
You can distribute your script to other people so that they can also run the commands.
Some situations do not allow for interactive use, for example, when you run a query from a cron job. In this case, you must use batch mode.
The default output format is different (more concise) when you run
mysql in batch mode than when you use it
interactively. For example, the output of SELECT DISTINCT
species FROM pet
looks like this when
mysql is run interactively:
+---------+ | species | +---------+ | bird | | cat | | dog | | hamster | | snake | +---------+
In batch mode, the output looks like this instead:
species bird cat dog hamster snake
If you want to get the interactive output format in batch mode,
use mysql -t
. To echo to the output the
commands that are executed, use mysql -vvv
.
You can also use scripts from the mysql prompt
by using the source
or \.
command:
mysql>source filename;
mysql>\. filename
AUTO_INCREMENT
Here are examples of how to solve some common problems with MySQL.
Some of the examples use the table shop
to hold
the price of each article (item number) for certain traders
(dealers). Supposing that each trader has a single fixed price per
article, then (article
,
dealer
) is a primary key for the records.
Start the command-line tool mysql and select a database:
shell> mysql your-database-name
(In most MySQL installations, you can use the database named
test
).
You can create and populate the example table with these statements:
mysql>CREATE TABLE shop (
->article INT(4) UNSIGNED ZEROFILL DEFAULT '0000' NOT NULL,
->dealer CHAR(20) DEFAULT '' NOT NULL,
->price DOUBLE(16,2) DEFAULT '0.00' NOT NULL,
->PRIMARY KEY(article, dealer));
mysql>INSERT INTO shop VALUES
->(1,'A',3.45),(1,'B',3.99),(2,'A',10.99),(3,'B',1.45),
->(3,'C',1.69),(3,'D',1.25),(4,'D',19.95);
After issuing the statements, the table should have the following contents:
mysql> SELECT * FROM shop;
+---------+--------+-------+
| article | dealer | price |
+---------+--------+-------+
| 0001 | A | 3.45 |
| 0001 | B | 3.99 |
| 0002 | A | 10.99 |
| 0003 | B | 1.45 |
| 0003 | C | 1.69 |
| 0003 | D | 1.25 |
| 0004 | D | 19.95 |
+---------+--------+-------+
“What's the highest item number?”
SELECT MAX(article) AS article FROM shop; +---------+ | article | +---------+ | 4 | +---------+
Task: Find the number, dealer, and price of the most expensive article.
This is easily done with a subquery:
SELECT article, dealer, price FROM shop WHERE price=(SELECT MAX(price) FROM shop);
Another solution is to sort all rows descending by price and get
only the first row using the MySQL-specific
LIMIT
clause:
SELECT article, dealer, price FROM shop ORDER BY price DESC LIMIT 1;
Note: If there were several
most expensive articles, each with a price of 19.95, the
LIMIT
solution would show only one of them.
Task: Find the highest price per article.
SELECT article, MAX(price) AS price FROM shop GROUP BY article +---------+-------+ | article | price | +---------+-------+ | 0001 | 3.99 | | 0002 | 10.99 | | 0003 | 1.69 | | 0004 | 19.95 | +---------+-------+
Task: For each article, find the dealer or dealers with the most expensive price.
This problem can be solved with a subquery like this one:
SELECT article, dealer, price FROM shop s1 WHERE price=(SELECT MAX(s2.price) FROM shop s2 WHERE s1.article = s2.article);
You can employ MySQL user variables to remember results without having to store them in temporary variables in the client. (See Section 9.3, “User-Defined Variables”.)
For example, to find the articles with the highest and lowest price you can do this:
mysql>SELECT @min_price:=MIN(price),@max_price:=MAX(price) FROM shop;
mysql>SELECT * FROM shop WHERE price=@min_price OR price=@max_price;
+---------+--------+-------+ | article | dealer | price | +---------+--------+-------+ | 0003 | D | 1.25 | | 0004 | D | 19.95 | +---------+--------+-------+
In MySQL, InnoDB
tables support checking of
foreign key constraints. See Section 14.2, “The InnoDB
Storage Engine”, and
Section 1.9.5.5, “Foreign Keys”.
A foreign key constraint is not required merely to join two
tables. For storage engines other than
InnoDB
, it is possible when defining a column
to use a REFERENCES
clause, which has no actual effect, and serves only as
a memo or comment to you that the column which you are currently
defining is intended to refer to a column in another
table. It is extremely important to realize when
using this syntax that:
tbl_name
(col_name
)
MySQL does not perform any sort of CHECK
to make sure that col_name
actually exists in tbl_name
(or
even that tbl_name
itself
exists).
MySQL does not perform any sort of action on
tbl_name
such as deleting rows in
response to actions taken on rows in the table which you are
defining; in other words, this syntax induces no ON
DELETE
or ON UPDATE
behavior
whatsoever. (Although you can write an ON
DELETE
or ON UPDATE
clause as
part of the REFERENCES
clause, it is also
ignored.)
This syntax creates a column; it does not create any sort of index or key.
This syntax will cause an error if used in trying to define
an InnoDB
table.
You can use a column so created as a join column, as shown here:
CREATE TABLE person ( id SMALLINT UNSIGNED NOT NULL AUTO_INCREMENT, name CHAR(60) NOT NULL, PRIMARY KEY (id) ); CREATE TABLE shirt ( id SMALLINT UNSIGNED NOT NULL AUTO_INCREMENT, style ENUM('t-shirt', 'polo', 'dress') NOT NULL, color ENUM('red', 'blue', 'orange', 'white', 'black') NOT NULL, owner SMALLINT UNSIGNED NOT NULL REFERENCES person(id), PRIMARY KEY (id) ); INSERT INTO person VALUES (NULL, 'Antonio Paz'); SELECT @last := LAST_INSERT_ID(); INSERT INTO shirt VALUES (NULL, 'polo', 'blue', @last), (NULL, 'dress', 'white', @last), (NULL, 't-shirt', 'blue', @last); INSERT INTO person VALUES (NULL, 'Lilliana Angelovska'); SELECT @last := LAST_INSERT_ID(); INSERT INTO shirt VALUES (NULL, 'dress', 'orange', @last), (NULL, 'polo', 'red', @last), (NULL, 'dress', 'blue', @last), (NULL, 't-shirt', 'white', @last); SELECT * FROM person; +----+---------------------+ | id | name | +----+---------------------+ | 1 | Antonio Paz | | 2 | Lilliana Angelovska | +----+---------------------+ SELECT * FROM shirt; +----+---------+--------+-------+ | id | style | color | owner | +----+---------+--------+-------+ | 1 | polo | blue | 1 | | 2 | dress | white | 1 | | 3 | t-shirt | blue | 1 | | 4 | dress | orange | 2 | | 5 | polo | red | 2 | | 6 | dress | blue | 2 | | 7 | t-shirt | white | 2 | +----+---------+--------+-------+ SELECT s.* FROM person p INNER JOIN shirt s ON s.owner = p.id WHERE p.name LIKE 'Lilliana%' AND s.color <> 'white'; +----+-------+--------+-------+ | id | style | color | owner | +----+-------+--------+-------+ | 4 | dress | orange | 2 | | 5 | polo | red | 2 | | 6 | dress | blue | 2 | +----+-------+--------+-------+
When used in this fashion, the REFERENCES
clause is not displayed in the output of SHOW CREATE
TABLE
or DESCRIBE
:
SHOW CREATE TABLE shirt\G *************************** 1. row *************************** Table: shirt Create Table: CREATE TABLE `shirt` ( `id` smallint(5) unsigned NOT NULL auto_increment, `style` enum('t-shirt','polo','dress') NOT NULL, `color` enum('red','blue','orange','white','black') NOT NULL, `owner` smallint(5) unsigned NOT NULL, PRIMARY KEY (`id`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1
The use of REFERENCES
in this way as a
comment or “reminder” in a column definition works
with both MyISAM
and
BerkeleyDB
tables.
An OR
using a single key is well optimized,
as is the handling of AND
.
The one tricky case is that of searching on two different keys
combined with OR
:
SELECT field1_index, field2_index FROM test_table WHERE field1_index = '1' OR field2_index = '1'
This case is optimized from MySQL 5.0.0. See Section 7.2.6, “Index Merge Optimization”.
You can also solve the problem efficiently by using a
UNION
that combines the output of two
separate SELECT
statements. See
Section 13.2.7.2, “UNION
Syntax”.
Each SELECT
searches only one key and can be
optimized:
SELECT field1_index, field2_index FROM test_table WHERE field1_index = '1' UNION SELECT field1_index, field2_index FROM test_table WHERE field2_index = '1';
The following example shows how you can use the bit group functions to calculate the number of days per month a user has visited a Web page.
CREATE TABLE t1 (year YEAR(4), month INT(2) UNSIGNED ZEROFILL, day INT(2) UNSIGNED ZEROFILL); INSERT INTO t1 VALUES(2000,1,1),(2000,1,20),(2000,1,30),(2000,2,2), (2000,2,23),(2000,2,23);
The example table contains year-month-day values representing visits by users to the page. To determine how many different days in each month these visits occur, use this query:
SELECT year,month,BIT_COUNT(BIT_OR(1<<day)) AS days FROM t1 GROUP BY year,month;
Which returns:
+------+-------+------+ | year | month | days | +------+-------+------+ | 2000 | 01 | 3 | | 2000 | 02 | 2 | +------+-------+------+
The query calculates how many different days appear in the table for each year/month combination, with automatic removal of duplicate entries.
The AUTO_INCREMENT
attribute can be used to
generate a unique identity for new rows:
CREATE TABLE animals ( id MEDIUMINT NOT NULL AUTO_INCREMENT, name CHAR(30) NOT NULL, PRIMARY KEY (id) ); INSERT INTO animals (name) VALUES ('dog'),('cat'),('penguin'), ('lax'),('whale'),('ostrich'); SELECT * FROM animals;
Which returns:
+----+---------+ | id | name | +----+---------+ | 1 | dog | | 2 | cat | | 3 | penguin | | 4 | lax | | 5 | whale | | 6 | ostrich | +----+---------+
You can retrieve the most recent
AUTO_INCREMENT
value with the
LAST_INSERT_ID()
SQL function or the
mysql_insert_id()
C API function. These
functions are connection-specific, so their return values are
not affected by another connection which is also performing
inserts.
Note: For a multiple-row
insert, LAST_INSERT_ID()
and
mysql_insert_id()
actually return the
AUTO_INCREMENT
key from the
first of the inserted rows. This allows
multiple-row inserts to be reproduced correctly on other servers
in a replication setup.
For MyISAM
and BDB
tables
you can specify AUTO_INCREMENT
on a secondary
column in a multiple-column index. In this case, the generated
value for the AUTO_INCREMENT
column is
calculated as
MAX(
. This
is useful when you want to put data into ordered groups.
auto_increment_column
) +
1 WHERE
prefix=given-prefix
CREATE TABLE animals ( grp ENUM('fish','mammal','bird') NOT NULL, id MEDIUMINT NOT NULL AUTO_INCREMENT, name CHAR(30) NOT NULL, PRIMARY KEY (grp,id) ); INSERT INTO animals (grp,name) VALUES ('mammal','dog'),('mammal','cat'), ('bird','penguin'),('fish','lax'),('mammal','whale'), ('bird','ostrich'); SELECT * FROM animals ORDER BY grp,id;
Which returns:
+--------+----+---------+ | grp | id | name | +--------+----+---------+ | fish | 1 | lax | | mammal | 1 | dog | | mammal | 2 | cat | | mammal | 3 | whale | | bird | 1 | penguin | | bird | 2 | ostrich | +--------+----+---------+
Note that in this case (when the
AUTO_INCREMENT
column is part of a
multiple-column index), AUTO_INCREMENT
values
are reused if you delete the row with the biggest
AUTO_INCREMENT
value in any group. This
happens even for MyISAM
tables, for which
AUTO_INCREMENT
values normally are not
reused.
If the AUTO_INCREMENT
column is part of
multiple indexes, MySQL will generate sequence values using the
index that begins with the AUTO_INCREMENT
column, if there is one. For example, if the
animals
table contained indexes
PRIMARY KEY (grp, id)
and INDEX
(id)
, MySQL would ignore the PRIMARY
KEY
for generating sequence values. As a result, the
table would contain a single sequence, not a sequence per
grp
value.
To start with an AUTO_INCREMENT
value other
than 1, you can set that value with CREATE
TABLE
or ALTER TABLE
, like this:
mysql> ALTER TABLE tbl AUTO_INCREMENT = 100;
More information about AUTO_INCREMENT
is
available here:
How to assign the AUTO_INCREMENT
attribute to a column: Section 13.1.5, “CREATE TABLE
Syntax”, and
Section 13.1.2, “ALTER TABLE
Syntax”.
How AUTO_INCREMENT
behaves depending on
the SQL mode: Section 5.2.5, “The Server SQL Mode”.
Find the row that contains the most recent AUTO_INCREMENT value: Section 12.1.3, “Comparison Functions and Operators”.
Set the AUTO_INCREMENT
value to be
used: Section 13.5.3, “SET
Syntax”.
AUTO_INCREMENT
and replication:
Section 6.7, “Replication Features and Known Problems”.
Server-system variables related to
AUTO_INCREMENT
(auto_increment_increment
and
auto_increment_offset
) that can be used
for replication:
Section 5.2.2, “Server System Variables”.
At Analytikerna and Lentus, we have been doing the systems and field work for a big research project. This project is a collaboration between the Institute of Environmental Medicine at Karolinska Institutet Stockholm and the Section on Clinical Research in Aging and Psychology at the University of Southern California.
The project involves a screening part where all twins in Sweden older than 65 years are interviewed by telephone. Twins who meet certain criteria are passed on to the next stage. In this latter stage, twins who want to participate are visited by a doctor/nurse team. Some of the examinations include physical and neuropsychological examination, laboratory testing, neuroimaging, psychological status assessment, and family history collection. In addition, data are collected on medical and environmental risk factors.
More information about Twin studies can be found at: http://www.mep.ki.se/twinreg/index_en.html
The latter part of the project is administered with a Web interface written using Perl and MySQL.
Each night all data from the interviews is moved into a MySQL database.
The following query is used to determine who goes into the second part of the project:
SELECT CONCAT(p1.id, p1.tvab) + 0 AS tvid, CONCAT(p1.christian_name, ' ', p1.surname) AS Name, p1.postal_code AS Code, p1.city AS City, pg.abrev AS Area, IF(td.participation = 'Aborted', 'A', ' ') AS A, p1.dead AS dead1, l.event AS event1, td.suspect AS tsuspect1, id.suspect AS isuspect1, td.severe AS tsevere1, id.severe AS isevere1, p2.dead AS dead2, l2.event AS event2, h2.nurse AS nurse2, h2.doctor AS doctor2, td2.suspect AS tsuspect2, id2.suspect AS isuspect2, td2.severe AS tsevere2, id2.severe AS isevere2, l.finish_date FROM twin_project AS tp /* For Twin 1 */ LEFT JOIN twin_data AS td ON tp.id = td.id AND tp.tvab = td.tvab LEFT JOIN informant_data AS id ON tp.id = id.id AND tp.tvab = id.tvab LEFT JOIN harmony AS h ON tp.id = h.id AND tp.tvab = h.tvab LEFT JOIN lentus AS l ON tp.id = l.id AND tp.tvab = l.tvab /* For Twin 2 */ LEFT JOIN twin_data AS td2 ON p2.id = td2.id AND p2.tvab = td2.tvab LEFT JOIN informant_data AS id2 ON p2.id = id2.id AND p2.tvab = id2.tvab LEFT JOIN harmony AS h2 ON p2.id = h2.id AND p2.tvab = h2.tvab LEFT JOIN lentus AS l2 ON p2.id = l2.id AND p2.tvab = l2.tvab, person_data AS p1, person_data AS p2, postal_groups AS pg WHERE /* p1 gets main twin and p2 gets his/her twin. */ /* ptvab is a field inverted from tvab */ p1.id = tp.id AND p1.tvab = tp.tvab AND p2.id = p1.id AND p2.ptvab = p1.tvab AND /* Just the screening survey */ tp.survey_no = 5 AND /* Skip if partner died before 65 but allow emigration (dead=9) */ (p2.dead = 0 OR p2.dead = 9 OR (p2.dead = 1 AND (p2.death_date = 0 OR (((TO_DAYS(p2.death_date) - TO_DAYS(p2.birthday)) / 365) >= 65)))) AND ( /* Twin is suspect */ (td.future_contact = 'Yes' AND td.suspect = 2) OR /* Twin is suspect - Informant is Blessed */ (td.future_contact = 'Yes' AND td.suspect = 1 AND id.suspect = 1) OR /* No twin - Informant is Blessed */ (ISNULL(td.suspect) AND id.suspect = 1 AND id.future_contact = 'Yes') OR /* Twin broken off - Informant is Blessed */ (td.participation = 'Aborted' AND id.suspect = 1 AND id.future_contact = 'Yes') OR /* Twin broken off - No inform - Have partner */ (td.participation = 'Aborted' AND ISNULL(id.suspect) AND p2.dead = 0)) AND l.event = 'Finished' /* Get at area code */ AND SUBSTRING(p1.postal_code, 1, 2) = pg.code /* Not already distributed */ AND (h.nurse IS NULL OR h.nurse=00 OR h.doctor=00) /* Has not refused or been aborted */ AND NOT (h.status = 'Refused' OR h.status = 'Aborted' OR h.status = 'Died' OR h.status = 'Other') ORDER BY tvid;
Some explanations:
CONCAT(p1.id, p1.tvab) + 0 AS tvid
We want to sort on the concatenated id
and tvab
in numerical order. Adding
0
to the result causes MySQL to treat the
result as a number.
column id
This identifies a pair of twins. It is a key in all tables.
column tvab
This identifies a twin in a pair. It has a value of
1
or 2
.
column ptvab
This is an inverse of tvab
. When
tvab
is 1
this is
2
, and vice versa. It exists to save
typing and to make it easier for MySQL to optimize the
query.
This query demonstrates, among other things, how to do lookups
on a table from the same table with a join
(p1
and p2
). In the
example, this is used to check whether a twin's partner died
before the age of 65. If so, the row is not returned.
All of the above exist in all tables with twin-related
information. We have a key on both id,tvab
(all tables), and id,ptvab
(person_data
) to make queries faster.
On our production machine (A 200MHz UltraSPARC), this query returns about 150-200 rows and takes less than one second.
The current number of records in the tables used in the query:
Table | Rows |
person_data | 71074 |
lentus | 5291 |
twin_project | 5286 |
twin_data | 2012 |
informant_data | 663 |
harmony | 381 |
postal_groups | 100 |
Each interview ends with a status code called
event
. The query shown here is used to
display a table over all twin pairs combined by event. This
indicates in how many pairs both twins are finished, in how many
pairs one twin is finished and the other refused, and so on.
SELECT t1.event, t2.event, COUNT(*) FROM lentus AS t1, lentus AS t2, twin_project AS tp WHERE /* We are looking at one pair at a time */ t1.id = tp.id AND t1.tvab=tp.tvab AND t1.id = t2.id /* Just the screening survey */ AND tp.survey_no = 5 /* This makes each pair only appear once */ AND t1.tvab='1' AND t2.tvab='2' GROUP BY t1.event, t2.event;
There are programs that let you authenticate your users from a MySQL database and also let you write your log files into a MySQL table.
You can change the Apache logging format to be easily readable by MySQL by putting the following into the Apache configuration file:
LogFormat \ "\"%h\",%{%Y%m%d%H%M%S}t,%>s,\"%b\",\"%{Content-Type}o\", \ \"%U\",\"%{Referer}i\",\"%{User-Agent}i\""
To load a log file in that format into MySQL, you can use a statement something like this:
LOAD DATA INFILE '/local/access_log
' INTO TABLEtbl_name
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' ESCAPED BY '\\'
The named table should be created to have columns that correspond
to those that the LogFormat
line writes to the
log file.