|
|
To change the configuration of a serial port, using the Serial Manager:
The device node used is /dev/term/nns.
The device node used is /dev/term/nnh.
The device node used is /dev/term/nnt.
The device node used is /dev/term/nnm.
See
``Serial device node naming conventions''
for further information on types of serial ports and device node names.
If auto is selected, the ttymon(1M) port monitor automatically detects and sets the serial port configuration. This setting is recommended for direct lines and serial terminals.
You may change the information for the following fields:
Adjust the slider bar to one of the values: 1, 4, 8, or 14. Select a lower value to alleviate data overruns (characters are being lost in incoming data). Select a higher value to improve performance by reducing the number of interrupts that the UART generates.