Resource Manager database corrupted
If the system does not boot and an error message
indicates that the resource manager database,
/stand/resmgr, is either corrupted or missing,
do the following:
-
Reboot UnixWare press the <Space> bar
when the
Booting UnixWare...
prompt is displayed.
-
At the boot prompt (
[boot]
) enter:
RESMGR=resmgr.sav
boot
This loads a backup copy of the resource manager database. You
system should then reboot.
NOTE:
When the system comes up you may want to invoke the DCU to
verify that all device driver parameters are set correctly. A
corrupted or missing resource manager database is normally the
result of improper changes made when adding/modifying hardware
parameters.
Next topic:
Controller problems
Previous topic:
System hangs repeatedly
© 2004 The SCO Group, Inc. All rights reserved.
UnixWare 7 Release 7.1.4 - 22 April 2004