Defining an outgoing PPP link
To define a new outgoing
PPP link using the PPP
Outgoing Connection Wizard:
-
On the
Provider
screen, enter details of the
service provider at the other end of the link.
Click on Next to access the next screen.
-
On the
PPP Authentication
screen, enter your
identifier and secret(s) if the remote side of the link
requires that you
authenticate yourself using CHAP or PAP.
Click on Next to access the next screen.
-
On the
Login Script
screen, enter details
if the remote end of the link
requires that you log in to authenticate yourself.
Click on Next to access the next screen.
-
On the
IP Network Protocol
screen, enter details about IP address negotiation and routing
that are required to establish a network connection with
the service provider.
Click on Next to access the next screen.
-
On the
Name Servers
screen, enter details about how the host will use DNS
to resolve domain names to IP addresses.
Click on Next to access the next screen.
-
On the
Link Devices
screen, enter details about the devices (modems over analog telephone lines,
or ISDN adapters over ISDN lines)
that can be used to establish a
connection to the service provider.
Click on Finish to complete the configuration of the link
definition.
Once you have entered these details, you should be able to access the
service provider using the newly defined link.
If you subsequently need to modify the configuration, select the
service provider bundle from the list in the bundle view, select
Wizard Modify ,
then select Outgoing -- Internet/Intranet,
and click on Start.
© 2004 The SCO Group, Inc. All rights reserved.
UnixWare 7 Release 7.1.4 - 22 April 2004