|
|
#include <sys/types.h> #include <sys/scoisdn.h>typedef isdnDword_t isdnPLCI_t;
isdnPLCI
(Physical Link Connection Identifier)
parameter describes a physical connection between two endpoints.
The PLCI is given by the ISDN driver during
the creation of the physical connection. This parameter is a
dword with a range from 1 to 255 (0 reserved), and
also includes the controller:
0 | 0 | PLCI | Ex./Int. | Controller |
---|---|---|---|---|
31 | 16 | 8 | 7 | 6 0 |
This type is used by:
ISDN_CONNECT.ISDN_CONF(D7isdn)
ISDN_CONNECT.ISDN_IND(D7isdn)
ISDN_CONNECT.ISDN_RESP(D7isdn)
ISDN_CONNECT_ACTIVE.ISDN_IND(D7isdn)
ISDN_CONNECT_ACTIVE.ISDN_RESP(D7isdn)
ISDN_DISCONNECT.ISDN_REQ(D7isdn)
ISDN_DISCONNECT.ISDN_CONF(D7isdn)
ISDN_DISCONNECT.ISDN_IND(D7isdn)
ISDN_DISCONNECT.ISDN_RESP(D7isdn)
ISDN_ALERT.ISDN_REQ(D7isdn)
ISDN_ALERT.ISDN_CONF(D7isdn)
ISDN_INFO.ISDN_REQ(D7isdn)
ISDN_INFO.ISDN_CONF(D7isdn)
ISDN_INFO.ISDN_IND(D7isdn)
ISDN_INFO.ISDN_RESP(D7isdn)
ISDN_CONNECT_B3.ISDN_REQ(D7isdn)
ISDN_CONNECT_B3.ISDN_CONF(D7isdn)
ISDN_SELECT_B_PROTOCOL.ISDN_REQ(D7isdn)
ISDN_SELECT_B_PROTOCOL.ISDN_CONF(D7isdn)
``SCO ISDN adapter drivers'' in Developing MDI network adapter drivers.