Incorrect IRQ value
If the IRQ for a device driver is changed from 9 to 2, some
devices do not function correctly (for example, modems).
Use the DCU to change the IRQ value back to
9. In particular, when the jumper is set to 2 on an AT bus
system, the IRQ should be set to 9. If the IRQ value is 9, do
not change it. If the IRQ value is 2, change it to 9.
Next topic:
Unknown traps or spurious interrupts
Previous topic:
I/O address, memory address, or interrupt conflicts
© 2004 The SCO Group, Inc. All rights reserved.
UnixWare 7 Release 7.1.4 - 22 April 2004