|
|
Here, we collect together some descriptions of the various modules available for Linux-PAM. In general these modules should be freely available. Where this is not the case, it will be indicated.
Also please note the comments contained in the section on text conventions above when copying the examples listed below.
pam_access
Alexei Nogin <alexei@nogin.dnttm.ru>
account
Requires a configuration file. By default
/etc/security/access.conf
is used but this can be overridden.
Through PAM_TTY
if set, otherwise attempts getting tty name of
the stdin file descriptor with ttyname()
. Standard
gethostname(), yp_get_default_domain()
, gethostbyname()
calls. NIS is used for netgroup support.
Provides logdaemon style login access control.
accessfile=/path/to/file.conf
;
fieldsep=separators
This module provides logdaemon style login access control based on
login names and on host (or domain) names, internet addresses (or
network numbers), or on terminal line names in case of non-networked
logins. Diagnostics are reported through syslog(3)
. Wietse
Venema's login_access.c
from logdaemon-5.6 is used with
several changes by A. Nogin.
The behavior of this module can be modified with the following arguments:
accessfile=/path/to/file.conf
-
indicate an alternative access configuration file to override
the default. This can be useful when different services need different
access lists.
fieldsep=separators
-
this option modifies the field separator character that
pam_access
will recognize when parsing the access configuration
file. For example: fieldsep=|
will cause the default `:'
character to be treated as part of a field value and `|' becomes the
field separator. Doing this is useful in conjuction with a system that
wants to use pam_access with X based applications, since the
PAM_TTY
item is likely to be of the form "hostname:0" which
includes a `:' character in its value.
Use of module is recommended, for example, on administrative machines such as NIS servers and mail servers where you need several accounts active but don't want them all to have login capability.
For /etc/pam.d
style configurations where your modules live
in /lib/security
, start by adding the following line to
/etc/pam.d/login
, /etc/pam.d/rlogin
,
/etc/pam.d/rsh
and /etc/pam.d/ftp
:
account required /lib/security/pam_access.so
Note that use of this module is not effective unless your system ignores
.rhosts
files. See the the pam_rhosts_auth documentation.
A sample access.conf
configuration file is included with the
distribution.
pam_chroot
Bruce Campbell <brucec@humbug.org.au>
Author; proposed on 20/11/96 - email for status
account; session; authentication
Unwritten.
Expects localhost.
This module is intended to provide a transparent wrapper around the
average user, one that puts them in a fake file-system (eg, their
'/
' is really /some/where/else
).
Useful if you have several classes of users, and are slightly paranoid about security. Can be used to limit who else users can see on the system, and to limit the selection of programs they can run.
Need more info here.
Need more info here.
Need more info here.
Arguments and logging levels for the PAM version are being worked on.
Do provide a reasonable list of programs - just tossing 'cat', 'ls', 'rm', 'cp' and 'ed' in there is a bit...
Don't take it to extremes (eg, you can set up a separate environment for each user, but its a big waste of your disk space.)
pam_cracklib
Cristian Gafton <gafton@redhat.com>
Author.
password
Requires the system library libcrack
and a system dictionary:
/usr/lib/cracklib_dict
.
This module can be plugged into the password
stack of a given
application to provide some plug-in strength-checking for passwords.
This module works in the following manner: it first calls the Cracklib routine to check the strength of the password; if crack likes the password, the module does an additional set of strength checks. These checks are:
difok
which is a number of characters
that if different between the old and new are enough to accept the new
password, this defaults to 10 or 1/2 the size of the new password
whichever is smaller.
To avoid the lockup associated with trying to change a long and
complicated password, difignore
is available. This argument can
be used to specify the minimum length a new password needs to be
before the difok
value is ignored. The default value for
difignore
is 23.
minlen
, dcredit
, ucredit
, lcredit
, and
ocredit
. See the section on the arguments for the details of how
these work and there defaults.
This module with no arguments will work well for standard unix password encryption. With md5 encryption, passwords can be longer than 8 characters and the default settings for this module can make it hard for the user to choose a satisfactory new password. Notably, the requirement that the new password contain no more than 1/2 of the characters in the old password becomes a non-trivial constraint. For example, an old password of the form "the quick brown fox jumped over the lazy dogs" would be difficult to change... In addition, the default action is to allow passwords as small as 5 characters in length. For a md5 systems it can be a good idea to increase the required minimum size of a password. One can then allow more credit for different kinds of characters but accept that the new password may share most of these characters with the old password.
debug
; type=XXX
; retry=N
; difok=N
; minlen=N
;
dcredit=N
; ucredit=N
; lcredit=N
; ocredit=N
;
use_authtok
;
The action of this module is to prompt the user for a password and check its strength against a system dictionary and a set of rules for identifying poor choices.
The default action is to prompt for a single password, check its strength and then, if it is considered strong, prompt for the password a second time (to verify that it was typed correctly on the first occasion). All being well, the password is passed on to subsequent modules to be installed as the new authentication token.
The default action may be modified in a number of ways using the arguments recognized by the module:
debug
-
this option makes the module write information to syslog(3) indicating
the behavior of the module (this option does not write password
information to the log file).
type=XXX
-
the default action is for the module to use the following prompts when
requesting passwords: ``New UNIX password: '' and ``Retype UNIX
password: ''. Using this option you can replace the word UNIX with
XXX
.
retry=N
-
the default number of times this module will request a new password
(for strength-checking) from the user is 1. Using this argument this
can be increased to N
.
difok=N
-
This argument will change the default of 10 for the number of
characters in the new password that must not be present in the old
password. In addition, if 1/2 of the characters in the new password
are different then the new password will be accepted anyway.
minlen=N
-
The minimum acceptable size for the new password (plus one if credits
are not disabled which is the default).
In addition to the number of characters in the new password, credit (of
+1 in length) is given for each different kind of character (other,
upper, lower and digit). The default for this parameter is
9 which is good for a old style UNIX password all of the same type of
character but may be too low to exploit the added security of a md5
system. Note that there is a pair of length limits in
Cracklib itself, a "way too short" limit of 4 which is hard
coded in and a defined limit (6) that will be checked without
reference to minlen
. If you want to allow passwords as short
as 5 characters you should either not use this module or recompile
the crack library and then recompile this module.
dcredit=N
-
(N >= 0) This is the maximum credit for having digits in the new password. If
you have less than or N
digits, each digit will count +1 towards
meeting the current minlen
value. The default for dcredit
is 1 which is the recommended value for minlen
less than 10.
(N < 0) This is the minimum number of digits that must be met for a new
password.
ucredit=N
-
(N >= 0) This is the maximum credit for having upper case letters in the new
password. If you have less than or N
upper case letters each
letter will count +1 towards meeting the current minlen
value.
The default for ucredit
is 1 which is the recommended value for
minlen
less than 10. (N < 0) This is the minimum number of upper
case letters that must be met for a new password.
lcredit=N
-
(N >= 0) This is the maximum credit for having lower case letters in the new
password. If you have less than or N
lower case letters, each
letter will count +1 towards meeting the current minlen
value.
The default for lcredit
is 1 which is the recommended value for
minlen
less than 10. (N < 0) This is the minimum number of lower
case letters that must be met for a new password.
ocredit=N
-
(N >= 0) This is the maximum credit for having other characters in the new
password. If you have less than or N
other characters, each
character will count +1 towards meeting the current minlen
value.
The default for ocredit
is 1 which is the recommended value for
minlen
less than 10. (N < 0) This is the minimum number of other
characters that must be met for a new password.
use_authtok
-
This argument is used to force the module to not prompt the user
for a new password but use the one provided by the previously stacked
password
module.
For an example of the use of this module, we show how it may be
stacked with the password component of pam_pwdb
:
#
# These lines stack two password type modules. In this example the
# user is given 3 opportunities to enter a strong password. The
# "use_authtok" argument ensures that the pam_pwdb module does not
# prompt for a password, but instead uses the one provided by
# pam_cracklib.
#
passwd password required pam_cracklib.so retry=3
passwd password required pam_pwdb.so use_authtok
Another example (in the /etc/pam.d/passwd
format) is for the
case that you want to use md5 password encryption:
#%PAM-1.0
#
# These lines allow a md5 systems to support passwords of at least 14
# bytes with extra credit of 2 for digits and 2 for others the new
# password must have at least three bytes that are not present in the
# old password
#
password required pam_cracklib.so \
difok=3 minlen=15 dcredit= 2 ocredit=2
password required pam_pwdb.so use_authtok nullok md5
And here is another example in case you don't want to use credits:
#%PAM-1.0
#
# These lines require the user to select a password with a minimum
# length of 8 and with at least 1 digit number, 1 upper case letter,
# and 1 other character
#
password required pam_cracklib.so \
dcredit=-1 ucredit=-1 ocredit=-1 lcredit=0 minlen=8
password required pam_pwdb.so use_authtok nullok md5
In this example we simply say that the password must have a minimum length of 8:
#%PAM-1.0
#
# These lines require the user to select a password with a mimimum
# length of 8. He gets no credits and he is not forced to use
# digit numbers, upper case letters etc.
#
password required pam_cracklib.so \
dcredit=0 ucredit=0 ocredit=0 lcredit=0 minlen=8
password required pam_pwdb.so use_authtok nullok md5
pam_deny
Andrew G. Morgan <morgan@kernel.org>
current Linux-PAM maintainer
account; authentication; password; session
clean.
This module can be used to deny access. It always indicates a failure
to the application through the PAM framework. As is commented in the
overview section
above, this module
might be suitable for using for default (the OTHER
) entries.
This component does nothing other than return a failure. The
failure type is PAM_ACCT_EXPIRED
.
Stacking this module with type account
will prevent the user from
gaining access to the system via applications that refer to
Linux-PAM's account management function pam_acct_mgmt()
.
The following example would make it impossible to login:
#
# add this line to your other login entries to disable all accounts
#
login account required pam_deny.so
This component does nothing other than return a failure. The failure
type is PAM_AUTH_ERR
in the case that pam_authenticate()
is
called (when the application tries to authenticate the user), and is
PAM_CRED_UNAVAIL
when the application calls pam_setcred()
(to establish and set the credentials of the user -- it is unlikely
that this function will ever be called in practice).
To deny access to default applications with this component of the
pam_deny
module, you might include the following line in your
Linux-PAM configuration file:
#
# add this line to your existing OTHER entries to prevent
# authentication succeeding with default applications.
#
OTHER auth required pam_deny.so
This component of the module denies the user the opportunity to change
their password. It always responds with PAM_AUTHTOK_ERR
when
invoked.
This module should be used to prevent an application from updating the
applicant user's password. For example, to prevent login
from
automatically prompting for a new password when the old one has
expired you should include the following line in your configuration
file:
#
# add this line to your other login entries to prevent the login
# application from being able to change the user's password.
#
login password required pam_deny.so
This aspect of the module prevents an application from starting a session on the host computer.
Together with another session module, that displays a message of the
day perhaps (pam_motd
for example), this module can be used to
block a user from starting a shell. We might use the following entries
in the configuration file to inform the user it is system time:
#
# An example to see how to configure login to refuse the user a
# session (politely)
#
login session required pam_motd.so \
motd=/etc/system_time
login session required pam_deny.so
pam_env
Dave Kinchlea <kinch@kinch.ark.com>
Author
Authentication (setcred)
/etc/security/pam_env.conf
This module allows the (un)setting of environment variables. Supported
is the use of previously set environment variables as well as
PAM_ITEMs such as PAM_RHOST
.
debug
; conffile=
configuration-file-name;
envfile
=env-file-name; readenv
=0|1
This module allows you to (un)set arbitrary environment variables using fixed strings, the value of previously set environment variables and/or PAM_ITEMs.
All is controlled via a configuration file (by default,
/etc/security/pam_env.conf
but can be overriden with
conffile
argument). Each line starts with the variable name,
there are then two possible options for each variable DEFAULT
and OVERRIDE. DEFAULT allows an administrator to
set the value of the variable to some default value, if none is
supplied then the empty string is assumed. The OVERRIDE
option tells pam_env that it should enter in its value (overriding the
default value) if there is one to use. OVERRIDE is not used,
""
is assumed and no override will be done.
VARIABLE [DEFAULT=[value]] [OVERRIDE=[value]]
(Possibly non-existent) environment variables may be used in values
using the ${string}
syntax and (possibly
non-existent) PAM_ITEMs may be used in values using the
@{string}
syntax. Both the $
and @
characters can be backslash-escaped to be used
as literal values (as in \$
. Double quotes may
be used in values (but not environment variable names) when white
space is needed the full value must be delimited by the quotes and
embedded or escaped quotes are not supported.
This module can also parse a file with simple KEY=VAL
pairs
on seperate lines (/etc/environment
by default). You can
change the default file to parse, with the envfile flag and turn
it on or off by setting the readenv flag to 1 or 0 respectively.
The behavior of this module can be modified with one of the following flags:
debug
- write more information to syslog(3)
.
conffile=
filename
- by default the file /etc/security/pam_env.conf
is used as
the configuration file. This option overrides the default. You must
supply a complete path + file name.
envfile=
filename
- by default the file /etc/environment
is used to load KEY=VAL
pairs directly into the env. This option overrides the default. You must
supply a complete path + file name.
readenv=
0|1
- turns on or off the reading of the file specified by envfile (0 is off,
1 is on). By default this option is on.
See sample pam_env.conf
for more information and examples.
pam_filter
Andrew G. Morgan <morgan@kernel.org>
Author.
account; authentication; password; session
Not yet.
This module compiles cleanly on Linux based systems.
To function it requires filters to be installed on the system.
This module was written to offer a plug-in alternative to programs like ttysnoop (XXX - need a reference). Since writing a filter that performs this function has not occurred, it is currently only a toy. The single filter provided with the module simply transposes upper and lower case letters in the input and output streams. (This can be very annoying and is not kind to termcap based editors).
debug
; new_term
; non_term
; runX
Each component of the module has the potential to invoke the desired
filter. The filter is always execv(2)
d with the privilege of the
calling application and not that of the user. For this reason it
cannot usually be killed by the user without closing their session.
The behavior of the module can be significantly altered by the arguments passed to it in the Linux-PAM configuration file:
debug
-
this option increases the amount of information logged to
syslog(3)
as the module is executed.
new_term
-
the default action of the filter is to set the PAM_TTY
item to
indicate the terminal that the user is using to connect to the
application. This argument indicates that the filter should set
PAM_TTY
to the filtered pseudo-terminal.
non_term
-
don't try to set the PAM_TTY
item.
runX
-
in order that the module can invoke a filter it should know when to
invoke it. This argument is required to tell the filter when to do
this. The arguments that follow this one are respectively the full
pathname of the filter to be run and any command line arguments that
the filter might expect.
Permitted values for X
are 1
and 2
. These indicate the
precise time that the filter is to be run. To understand this concept
it will be useful to have read the Linux-PAM Module developer's
guide. Basically, for each management group there are up to two ways
of calling the module's functions.
In the case of the authentication and session components
there are actually two separate functions. For the case of
authentication, these functions are _authenticate
and
_setcred
-- here run1
means run the filter from the
_authenticate
function and run2
means run the filter from
_setcred
. In the case of the session modules, run1
implies
that the filter is invoked at the _open_session
stage, and
run2
for _close_session
.
For the case of the account component. Either run1
or run2
may be used.
For the case of the password component, run1
is used to indicate
that the filter is run on the first occasion _chauthtok
is run
(the PAM_PRELIM_CHECK
phase) and run2
is used to indicate
that the filter is run on the second occasion (the
PAM_UPDATE_AUTHTOK
phase).
At the time of writing there is little real use to be made of this module. For fun you might try adding the following line to your login's configuration entries
#
# An example to see how to configure login to transpose upper and
# lower case letters once the user has logged in(!)
#
login session required pam_filter.so \
run1 /usr/sbin/pam_filter/upperLOWER
pam_ftp.so
Andrew G. Morgan <morgan@kernel.org>
Author.
authentication
prompts for email address of user; easily spoofed (XXX - needs work)
The purpose of this module is to provide a pluggable anonymous ftp mode of access.
debug
;
users=XXX,YYY,...
;
ignore
This module intercepts the user's name and password. If the name is
``ftp
'' or ``anonymous
'', the user's password is broken up
at the `@
' delimiter into a PAM_RUSER
and a PAM_RHOST
part; these pam-items being set accordingly. The username
(PAM_USER
) is set to ``ftp
''. In this case the module
succeeds. Alternatively, the module sets the PAM_AUTHTOK
item
with the entered password and fails.
The behavior of the module can be modified with the following flags:
debug
-
log more information to with syslog(3)
.
users=XXX,YYY,...
-
instead of ``ftp
'' or ``anonymous
'', provide anonymous login
to the comma separated list of users; ``XXX,YYY,...
''. Should the
applicant enter one of these usernames the returned username is set to
the first in the list; ``XXX
''.
ignore
-
pay no attention to the email address of the user (if supplied).
An example of the use of this module is provided in the configuration file section above. With care, this module could be used to provide new/temporary account anonymous login.
pam_group
Andrew G. Morgan <morgan@kernel.org>
Author.
authentication
Sensitive to setgid status of file-systems accessible to users.
Requires an /etc/security/group.conf
file. Can be compiled
with or without libpwdb
.
Only through correctly set PAM_TTY
item.
This module provides group-settings based on the user's name and the terminal they are requesting a given service from. It takes note of the time of day.
This module does not authenticate the user, but instead it grants
group memberships (in the credential setting phase of the
authentication module) to the user. Such memberships are based on the
service they are applying for. The group memberships are listed in
text form in the /etc/security/group.conf
file.
For this module to function correctly there must be a correctly
formatted /etc/security/groups.conf
file present. The format
of this file is as follows. Group memberships are given based on the
service application satisfying any combination of lines in the
configuration file. Each line (barring comments which are preceded by
`#
' marks) has the following
syntax:
services ; ttys ; users ; times ; groups
Here the first four fields share the syntax of the pam_time
configuration file; /etc/security/pam_time.conf
, and the last
field, the groups
field, is a comma (or space) separated list of
the text-names of a selection of groups. If the users application for
service satisfies the first four fields, the user is granted membership
of the listed groups.
As stated in above this module's usefulness relies on the file-systems accessible to the user. The point being that once granted the membership of a group, the user may attempt to create a setgid binary with a restricted group ownership. Later, when the user is not given membership to this group, they can recover group membership with the precompiled binary. The reason that the file-systems that the user has access to are so significant, is the fact that when a system is mounted nosuid the user is unable to create or execute such a binary file. For this module to provide any level of security, all file-systems that the user has write access to should be mounted nosuid.
The pam_group
module fuctions in parallel with the
/etc/group
file. If the user is granted any groups based on
the behavior of this module, they are granted in addition to
those entries /etc/group
(or equivalent).
pam_issue
Ben Collins <bcollins@debian.org>
Author
Authentication (pam_sm_authenticate)
This module prepends the issue file (/etc/issue by default) when prompting for a username.
issue=issue-file-name
; noesc
;
This module allows you to prepend an issue file to the username prompt. It also by default parses escape codes in the issue file similar to some common getty's (using \x format).
Recognized escapes:
d
- current date
s
- operating system name
l
- name of this tty
m
- architecture of this system (i686, sparc, powerpc, ...)
n
- hostname of this system
o
- domainname of this system
r
- release number of the operation system (eg. 2.2.12)
t
- current time
u
- number of users currently logged in
U
- same as u
, except it is suffixed with "user" or "users" (eg. "1
user" or "10 users"
v
- version/build-date of the operating system (eg. "#3 Mon Aug 23 14:38:16
EDT 1999" on Linux).
The behavior of this module can be modified with one of the following flags:
issue
- the file to output if not using the default
noesc
- turns off escape code parsing
login auth pam_issue.so issue=/etc/issue
pam_krb4
Derrick J. Brashear <shadow@dementia.org>
Author.
authentication; password; session
uses API
libraries - libkrb
, libdes
, libcom_err
, libkadm
;
and a set of Kerberos include files.
Gets Kerberos ticket granting ticket via a Kerberos key distribution center reached via the network.
This module provides an interface for doing Kerberos verification of a user's password, getting the user a Kerberos ticket granting ticket for use with the Kerberos ticket granting service, destroying the user's tickets at logout time, and changing a Kerberos password.
This component of the module currently sets the user's KRBTKFILE
environment variable (although there is currently no way to export
this), as well as deleting the user's ticket file upon logout (until
PAM_CRED_DELETE
is supported by login).
This part of the module won't be terribly useful until we can change
the environment from within a Linux-PAM
module.
use_first_pass
; try_first_pass
This component of the module changes a user's Kerberos password by first getting and using the user's old password to get a session key for the password changing service, then sending a new password to that service.
This should only be used with a real Kerberos v4 kadmind
. It
cannot be used with an AFS kaserver unless special provisions are
made. Contact the module author for more information.
use_first_pass
; try_first_pass
This component of the module verifies a user's Kerberos password by requesting a ticket granting ticket from the Kerberos server and optionally using it to attempt to retrieve the local computer's host key and verifying using the key file on the local machine if one exists.
It also writes out a ticket file for the user to use later, and
deletes the ticket file upon logout (not until PAM_CRED_DELETE
is called from login).
This module can be used with a real Kerberos server using MIT v4 Kerberos keys. The module or the system Kerberos libraries may be modified to support AFS style Kerberos keys. Currently this is not supported to avoid cryptography constraints.
pam_lastlog
Andrew G. Morgan <morgan@kernel.org>
Author
auth
uses information contained in the /var/log/lastlog
file.
This session module maintains the /var/log/lastlog
file. Adding
an open entry when called via the pam_open_seesion()
function
and completing it when pam_close_session()
is called. This
module can also display a line of information about the last login of
the user. If an application already performs these tasks, it is not
necessary to use this module.
debug
; nodate
; noterm
; nohost
; silent
;
never
This module can be used to provide a ``Last login on ...''
message. when the user logs into the system from what ever application
uses the PAM libraries. In addition, the module maintains the
/var/log/lastlog
file.
The behavior of this module can be modified with one of the following flags:
debug
- write more information to syslog(3)
.
nodate
- neglect to give the date of the last login when displaying
information about the last login on the system.
noterm
- neglect to diplay the terminal name on which the last login was
attempt.
nohost
- neglect to indicate from which host the last login was attempted.
silent
- neglect to inform the user about any previous login: just update
the /var/log/lastlog
file.
never
- if the /var/log/lastlog
file does not contain any old entries
for the user, indicate that the user has never previously logged in
with a ``welcome..." message.
This module can be used to indicate that the user has new mail when
they login to the system. Here is a sample entry for your
/etc/pam.d/XXX
file:
#
# When were we last here?
#
session optional pam_lastlog.so
Note, some applications may perform this function themselves. In such cases, this module is not necessary.
pam_limits
Cristian Gafton <gafton@redhat.com>
Thanks are also due to Elliot Lee <sopwith@redhat.com>
for his comments on improving this module.
Cristian Gafton - 1996/11/20
session
requires an /etc/security/limits.conf
file and kernel support
for resource limits. Also uses the library, libpwdb
.
This module, through the Linux-PAM open-session hook, sets limits on the system resources that can be obtained in a user-session. Its actions are dictated more explicitly through the configuration file discussed below.
debug
; conf=/path/to/file.conf
; change_uid
;
utmp_early
Through the contents of the configuration file,
/etc/security/limits.conf
, resource limits are placed on
users' sessions. Users of uid=0
are not affected by this
restriction.
The behavior of this module can be modified with the following arguments:
debug
-
verbose logging to syslog(3)
.
conf=/path/to/file.conf
-
indicate an alternative limits configuration file to the default.
change_uid
-
change real uid to the user for who the limits are set up. Use this
option if you have problems like login not forking a shell for user
who has no processes. Be warned that something else may break when
you do this.
utmp_early
-
some broken applications actually allocate a utmp entry for the user
before the user is admitted to the system. If some of the services you
are configuring PAM for do this, you can selectively use this module
argument to compensate for this behavior and at the same time maintain
system-wide consistency with a single limits.conf file.
In order to use this module the system administrator must first create
a root-only-readable file (default is
/etc/security/limits.conf
). This file describes the resource
limits the superuser wishes to impose on users and groups. No limits
are imposed on uid=0
accounts.
Each line of the configuration file describes a limit for a user in the form:
<domain> <type> <item> <value>
The fields listed above should be filled as follows...
<domain>
can be:
@group
syntax*
, for default entry%
, for maxlogins limit only,
can also be used with %group
syntax
<type>
can have the three values:
hard
for enforcing hard resource limits. These limits
are set by the superuser and enforced by the Linux Kernel. The user
cannot raise his requirement of system resources above such values.
soft
for enforcing soft resource limits. These limits
are ones that the user can move up or down within the permitted range
by any pre-exisiting hard limits. The values specified with this
token can be thought of as default values, for normal system
usage.
-
for enforcing both soft and hard limits
together.
<item>
can be one of the following:
core
- limits the core file size (KB)data
- max data size (KB)fsize
- maximum filesize (KB)memlock
- max locked-in-memory address space (KB)nofile
- max number of open filesrss
- max resident set size (KB)stack
- max stack size (KB)cpu
- max CPU time (MIN)nproc
- max number of processesas
- address space limitmaxlogins
- max number of logins for this usermaxsyslogins
- max number of logins on systempriority
- the priority to run user process with (negative
values boost process priority)locks
- max locked files (Linux 2.4 and higher)
Note, if you specify a type of ``-'' but neglect to supply the
item
and value
fields then the module will never enforce any
limits on the corresponding user/group-members etc. . Note, the first
entry of the form which applies to the authenticating user will
override all other entries in the limits configuration file. In such
cases, the pam_limits
module will always return PAM_SUCCESS
.
In general, individual limits have priority over group limits, so if
you impose no limits for admin
group, but one of the members in
this group have a limits line, the user will have its limits set
according to this line.
Also, please note that all limit settings are set per login. They are not global, nor are they permanent; existing only for the duration of the session.
In the limits configuration file, the ``#
'' character
introduces a comment - after which the rest of the line is ignored.
The pam_limits
module does its best to report configuration
problems found in its configuration file via syslog(3)
.
The following is an example configuration file:
# EXAMPLE /etc/security/limits.conf file:
# =======================================
# <domain> <type> <item> <value>
* soft core 0
* hard rss 10000
@student hard nproc 20
@faculty soft nproc 20
@faculty hard nproc 50
ftp hard nproc 0
@student - maxlogins 4
Note, the use of soft
and hard
limits for the same resource
(see @faculty
) -- this establishes the default and permitted
extreme level of resources that the user can obtain in a given
service-session.
Note, that wild-cards *
and %
have the following meaning when
used for maxlogins limit
*
every user%
all users, or entire group when %group
is specified
# EXAMPLE /etc/security/limits.conf file:
# <domain> <type> <item> <value>
* - maxlogins 2
@faculty - maxlogins 4
% - maxlogins 30
%student - maxlogins 10
Explanation: every user can login 2 times, members of the faculty
group can login 4 times, there can be only 30 logins, only 10 from
students
group.
For the services that need resources limits (login for example) put
the following line in /etc/pam.conf
as the last line for that
service (usually after the pam_unix session line:
#
# Resource limits imposed on login sessions via pam_limits
#
login session required pam_limits.so
pam_listfile
Elliot Lee <sopwith@cuc.edu>
Red Hat Software:
Michael K. Johnson <johnsonm@redhat.com> 1996/11/18
(if unavailable, contact Elliot Lee <sopwith@cuc.edu>).
authentication
clean
The list-file module provides a way to deny or allow services based on an arbitrary file.
onerr=succeed|fail
;
sense=allow|deny
;
file=
filename;
item=user|tty|rhost|ruser|group|shell
apply=user|@group
The module gets the item of the type specified -- user
specifies
the username, PAM_USER
; tty specifies the name of the terminal
over which the request has been made, PAM_TTY
; rhost specifies
the name of the remote host (if any) from which the request was made,
PAM_RHOST
; and ruser specifies the name of the remote user
(if available) who made the request, PAM_RUSER
-- and looks for
an instance of that item in the file filename. filename
contains one line per item listed. If the item is found, then if
sense=allow
, PAM_SUCCESS
is returned, causing the
authorization request to succeed; else if sense=deny
,
PAM_AUTH_ERR
is returned, causing the authorization
request to fail.
If an error is encountered (for instance, if filename
does not exist, or a poorly-constructed argument is encountered),
then if onerr=succeed
, PAM_SUCCESS
is returned,
otherwise if onerr=fail
, PAM_AUTH_ERR
or
PAM_SERVICE_ERR
(as appropriate) will be returned.
An additional argument, apply=
, can be used to restrict the
application of the above to a specific user
(apply=
username) or a given group
(apply=@
groupname). This added restriction is only
meaningful when used with the tty
, rhost
and shell
items.
Besides this last one, all arguments should be specified; do not count on any default behavior, as it is subject to change.
No credentials are awarded by this module.
Classic ``ftpusers'' authentication can be implemented with this entry
in /etc/pam.conf
:
#
# deny ftp-access to users listed in the /etc/ftpusers file
#
ftp auth required pam_listfile.so \
onerr=succeed item=user sense=deny file=/etc/ftpusers
Note, users listed in /etc/ftpusers
file are
(counterintuitively) not allowed access to the ftp service.
To allow login access only for certain users, you can use a
pam.conf
entry like this:
#
# permit login to users listed in /etc/loginusers
#
login auth required pam_listfile.so \
onerr=fail item=user sense=allow file=/etc/loginusers
For this example to work, all users who are allowed to use the login
service should be listed in the file /etc/loginusers
. Unless
you are explicitly trying to lock out root, make sure that when you do
this, you leave a way for root to log in, either by listing root in
/etc/loginusers
, or by listing a user who is able to su
to the root account.
pam_mail
Andrew G. Morgan <morgan@kernel.org>
Author
Authentication (credential) Session (open)
Default mail directory /var/spool/mail/
This module looks at the user's mail directory and indicates whether the user has any mail in it.
debug
; dir=
directory-name; nopen
; close
;
noenv
; empty
; hash=
hashcount; standard
;
quiet
;
This module provides the ``you have new mail'' service to the user. It
can be plugged into any application that has credential hooks. It gives a
single message indicating the newness of any mail it finds in the
user's mail folder. This module also sets the Linux-PAM
environment variable, MAIL
, to the user's mail directory.
The behavior of this module can be modified with one of the following flags:
debug
- write more information to syslog(3)
.
dir=
pathname
- look for the users' mail in an alternative directory given by
pathname. The default location for mail is
/var/spool/mail
. Note, if the supplied pathname is
prefixed by a `~
', the directory is interpreted as
indicating a file in the user's home directory.
nopen
- instruct the module to not print any mail information when the
user's credentials are acquired. This flag is useful to get the MAIL
environment variable set, but to not display any information about it.
close
- instruct the module to indicate if the user has any mail at the as
the user's credentials are revoked.
noenv
- do not set the MAIL
environment variable.
empty
- indicate that the user's mail directory is empty if this is found to
be the case.
hash=
hashcount
- mail directory hash depth. For example, a hashcount of 2 would
make the mailfile be /var/spool/mail/u/s/user
.
standard
- old style "You have..." format which doesn't show the mail spool being used.
this also implies "empty"
quiet
- only report when there is new mail.
This module can be used to indicate that the user has new mail when
they login to the system. Here is a sample entry for your
/etc/pam.conf
file:
#
# do we have any mail?
#
login session optional pam_mail.so
Note, if the mail spool file (be it /var/spool/mail/$USER
or
a pathname given with the dir=
parameter) is a directory then
pam_mail
assumes it is in the Qmail Maildir format.
Note, some applications may perform this function themselves. In such cases, this module is not necessary.
Then authentication companent works the same as the session component,
except that everything is done during the pam_setcred()
phase.
pam_mkhomedir
Jason Gunthorpe <jgg@ualberta.ca>
Ben Collins <bcollins@debian.org>
Session
Creates home directories on the fly for authenticated users.
debug
; skel=skeleton-dir
; umask=octal-umask
;
This module is useful for distributed systems where the user account is managed in a central database (such as NIS, NIS+, or LDAP) and accessed through miltiple systems. It frees the administrator from having to create a default home directory on each of the systems by creating it upon the first succesfully authenticated login of that user. The skeleton directory (usually /etc/skel/) is used to copy default files and also set's a umask for the creation.
The behavior of this module can be modified with one of the following flags:
skel
- The skeleton directory for default files to copy to the new home directory.
umask
- An octal for of the same format as you would pass to the shells umask command.
session required pam_mkhomedir.so skel=/etc/skel/ umask=0022
pam_motd
Ben Collins <bcollins@debian.org>
Author
Session (open)
This module outputs the motd file (/etc/motd by default) upon successful login.
debug
; motd=motd-file-name
;
This module allows you to have arbitrary motd's (message of the day) output after a succesful login. By default this file is /etc/motd, but is configurable to any file.
The behavior of this module can be modified with one of the following flags:
motd
- the file to output if not using the default.
login session pam_motd.so motd=/etc/motd
pam_nologin
Written by Michael K. Johnson <johnsonm@redhat.com>
account; authentication
Provides standard Unix nologin authentication.
successok, file=<filename>
Provides standard Unix nologin authentication. If the file
/etc/nologin
exists, only root is allowed to log in; other
users are turned away with an error message (and the module returns
PAM_AUTH_ERR
or PAM_USER_UNKNOWN
). All users (root or
otherwise) are shown the contents of /etc/nologin
.
If the file /etc/nologin
does not exist, this module defaults
to returning PAM_IGNORE
, but the successok
module argument
causes it to return PAM_SUCCESS
in this case.
The administrator can override the default nologin file with the
file=
pathname module argument.
In order to make this module effective, all login methods should be
secured by it. It should be used as a required
method listed
before any sufficient
methods in order to get standard Unix
nologin semantics. Note, the use of successok
module argument
causes the module to return PAM_SUCCESS
and as such would break
such a configuration - failing sufficient
modules would lead to a
successful login because the nologin module succeeded.
pam_permit
Andrew G. Morgan, <morgan@kernel.org>
Linux-PAM maintainer.
account; authentication; password; session
VERY LOW. Use with extreme caution.
Clean.
This module is very dangerous. It should be used with extreme caution. Its action is always to permit access. It does nothing else.
No matter what management group, the action of this module is to
simply return PAM_SUCCESS
-- operation successful.
In the case of authentication, the user's name will be acquired. Many applications become confused if this name is unknown.
It is seldom a good idea to use this module. However, it does have some legitimate uses. For example, if the system-administrator wishes to turn off the account management on a workstation, and at the same time continue to allow logins, then she might use the following configuration file entry for login:
#
# add this line to your other login entries to disable account
# management, but continue to permit users to log in...
#
login account required pam_permit.so
pam_pwdb
Cristian Gafton <gafton@redhat.com>
and Andrew G. Morgan <morgan@kernel.org>
Red Hat.
account; authentication; password; session
Requires properly configured libpwdb
This module is a pluggable replacement for the pam_unix_..
modules. It uses the generic interface of the Password Database
library libpwdb
.
debug
The debug
argument makes the accounting functions of this module
syslog(3)
more information on its actions. (Remaining arguments
supported by the other functions of this module are silently ignored,
but others are logged as errors through syslog(3)
).
Based on the following pwdb_element
s:
expire
;
last_change
;
max_change
;
defer_change
;
warn_change
,
this module performs the task of establishing the status of the user's
account and password. In the case of the latter, it may offer advice
to the user on changing their password or, through the
PAM_AUTHTOKEN_REQD
return, delay giving service to the user until
they have established a new password. The entries listed above are
documented in the Password Database Library Guide (see pointer
above). Should the user's record not contain one or more of these
entries, the corresponding shadow check is not performed.
In its accounting mode, this module can be inserted as follows:
#
# Ensure users account and password are still active
#
login account required pam_pwdb.so
debug
;
use_first_pass
;
try_first_pass
;
nullok
;
nodelay
;
likeauth
The debug
argument makes the authentication functions of this
module syslog(3)
more information on its actions.
The default action of this module is to not permit the user access to
a service if their official password is blank. The nullok
argument overrides this default.
When given the argument try_first_pass
, before prompting the user
for their password, the module first tries the previous stacked
auth
-module's password in case that satisfies this module as
well. The argument use_first_pass
forces the module to use such a
recalled password and will never prompt the user - if no password is
available or the password is not appropriate, the user will be denied
access.
The argument, nodelay
, can be used to discourage the
authentication component from requesting a delay should the
authentication as a whole fail. The default action is for the module
to request a delay-on-failure of the order of one second.
Remaining arguments, supported by the other functions of this module,
are silently ignored. Other arguments are logged as errors through
syslog(3)
.
A helper binary, pwdb_chkpwd
, is provided to check the user's
password when it is stored in a read protected database. This binary
is very simple and will only check the password of the user invoking
it. It is called transparently on behalf of the user by the
authenticating component of this module. In this way it is possible
for applications like xlock to work without being setuid-root.
The likeauth
argument makes the module return the same value
when called as a credential setting module and an authentication
module. This will help libpam take a sane path through the auth
component of your configuration file.
The correct functionality of this module is dictated by having an
appropriate /etc/pwdb.conf
file, the user
databases specified there dictate the source of the authenticated
user's record.
debug
; nullok
; not_set_pass
; use_authtok
;
try_first_pass
; use_first_pass
; md5
; bigcrypt
;
shadow
; radius
; unix
This part of the pam_pwdb
module performs the task of updating
the user's password. Thanks to the flexibility of libpwdb
this
module is able to move the user's password from one database to
another, perhaps securing the user's database entry in a dynamic
manner (this is very ALPHA code at the moment!) - this is the
purpose of the shadow
, radius
and unix
arguments.
In the case of conventional unix databases (which store the password
encrypted) the md5
argument is used to do the encryption with the
MD5 function as opposed to the conventional crypt(3)
call.
As an alternative to this, the bigcrypt
argument can be used to
encrypt more than the first 8 characters of a password with DEC's
(Digital Equipment Cooperation) `C2' extension to the standard UNIX
crypt()
algorithm.
The nullok
module is used to permit the changing of a password
from an empty one. Without this argument, empty passwords are
treated as account-locking ones.
The argument use_first_pass
is used to lock the choice of old and
new passwords to that dictated by the previously stacked password
module. The try_first_pass
argument is used to avoid the user
having to re-enter an old password when pam_pwdb
follows a module
that possibly shared the user's old password - if this old password is
not correct the user will be prompted for the correct one. The
argument use_authtok
is used to force this module to set the
new password to the one provided by the previously stacked
password
module (this is used in an example of the stacking of
the Cracklib module documented above).
The not_set_pass
argument is used to inform the module that it is
not to pay attention to/make available the old or new passwords from/to
other (stacked) password modules.
The debug
argument makes the password functions of this module
syslog(3)
more information on its actions. Other arguments may be
logged as erroneous to syslog(3)
.
An example of the stacking of this module with respect to the
pluggable password checking module, pam_cracklib
, is given in
that modules section above.
No arguments are recognized by this module component. Its action is
simply to log the username and the service-type to
syslog(3)
. Messages are logged at the beginning and end of the
user's session.
The use of the session modules is straightforward:
#
# pwdb - unix like session opening and closing
#
login session required pam_pwdb.so
pam_radius
Cristian Gafton <gafton@redhat.com>
Author.
session
This module does not deal with passwords
gcc reports 1 warning when compiling /usr/include/rpc/clnt.h
.
Hey, is not my fault !
yes; this is a network module (independent of application).
This module is intended to provide the session service for users authenticated with a RADIUS server. At the present stage, the only option supported is the use of the RADIUS server as an accounting server.
debug
- verbose logging to syslog(3)
.
This module is intended to provide the session service for users authenticated with a RADIUS server. At the present stage, the only option supported is the use of the RADIUS server as an accounting server.
(There are few things which needs to be cleared out first in the PAM project until one will be able to use this module and expect it to magically start pppd in response to a RADIUS server command to use PPP for this user, or to initiate a telnet connection to another host, or to hang and call back the user using parameters provided in the RADIUS server response. Most of these things are better suited for the radius login application. I hope to make available Real Soon (tm) patches for the login apps to make it work this way.)
When opening a session, this module sends an ``Accounting-Start'' message to the RADIUS server, which will log/update/whatever a database for this user. On close, an ``Accounting-Stop'' message is sent to the RADIUS server.
This module has no other prerequisites for making it work. One can install a RADIUS server just for fun and use it as a centralized accounting server and forget about wtmp/last/sac etc. .
For the services that need this module (login for example) put
the following line in /etc/pam.conf
as the last line for that
service (usually after the pam_unix session line):
login session required pam_radius.so
Replace login
for each service you are using this module.
This module make extensive use of the API provided in libpwdb
0.54preB or later. By default, it will read the radius server
configuration (hostname and secret) from /etc/raddb/server
.
This is a default compiled into libpwdb, and curently there is no way to
modify this default without recompiling libpwdb. I am working on
extending the radius support from libpwdb to provide a possibility
to make this runtime-configurable.
Also please note that libpwdb will require also the RADIUS
dictionary to be present (/etc/raddb/dictionary
).
pam_rhosts_auth
Al Longyear <longyear@netcom.com>
authentication
Clean.
Standard inet_addr()
, gethostbyname()
function calls.
This module performs the standard network authentication for services, as used by traditional implementations of rlogin and rsh etc.
no_hosts_equiv
; no_rhosts
; debug
; no_warn
;
privategroup
; promiscuous
; suppress
The authentication mechanism of this module is based on the contents
of two files; /etc/hosts.equiv
(or _PATH_HEQUIV
in
#include <netdb.h>
) and ~/.rhosts
. Firstly,
hosts listed in the former file are treated as equivalent to the
localhost. Secondly, entries in the user's own copy of the latter file
is used to map "remote-host remote-user
" pairs to that user's
account on the current host. Access is granted to the user if their
host is present in /etc/hosts.equiv
and their remote account
is identical to their local one, or if their remote account has an
entry in their personal configuration file.
Some restrictions are applied to the attributes of the user's personal
configuration file: it must be a regular file (as defined by
S_ISREG(x)
of POSIX.1); it must be owned by the superuser or
the user; it must not be writable by any user besides its owner.
The module authenticates a remote user (internally specified by the
item PAM_RUSER
) connecting from the remote host (internally
specified by the item PAM_RHOST
). Accordingly, for applications
to be compatible this authentication module they must set these items
prior to calling pam_authenticate()
. The module is not capable
of independently probing the network connection for such information.
In the case of root
-access, the /etc/host.equiv
file is
ignored unless the hosts_equiv_rootok
option
should be used. Instead, the superuser must have a correctly configured
personal configuration file.
The behavior of the module is modified by flags:
debug
-
log more information to syslog(3)
. (XXX - actually, this module
does not do any logging currently, please volunteer to fix this!)
no_warn
-
do not give verbal warnings to the user about failures etc. (XXX -
this module currently does not issue any warnings, please volunteer to
fix this!)
no_hosts_equiv
-
ignore the contents of the /etc/hosts.equiv
file.
hosts_equiv_rootok
-
allow the use of /etc/hosts.equiv
for superuser. Without this
option /etc/hosts.equiv
is not consulted for the superuser account.
This option has no effect if the no_hosts_equiv
option is used.
no_rhosts
-
ignore the contents of all user's personal configuration file
~/.rhosts
.
privategroup
-
normally, the ~/.rhosts
file must not be writable by anyone
other than its owner. This option overlooks group write access in the
case that the group owner of this file has the same name as the
user being authenticated. To lessen the security problems associated
with this option, the module also checks that the user is the only
member of their private group.
promiscuous
-
A host entry of `+' will lead to all hosts being granted
access. Without this option, '+' entries will be ignored. Note, that
the debug
option will syslog a warning in this latter case.
suppress
-
This will prevent the module from syslog(3)
ing a warning message
when this authentication fails. This option is mostly for keeping
logs free of meaningless errors, in particular when the module is used
with the sufficient
control flag.
To allow users to login from trusted remote machines, you should try
adding the following line to your /etc/pam.conf
file
before the line that would otherwise prompt the user for a
password:
#
# No passwords required for users from hosts listed above.
#
login auth sufficient pam_rhosts_auth.so no_rhosts
Note, in this example, the system administrator has turned off all
personal rhosts configuration files. Also note, that this module
can be used to only allow remote login from hosts specified in
the /etc/host.equiv
file, by replacing sufficient
in the
above example with required
.
pam_rootok
Andrew G. Morgan <morgan@kernel.org>
Linux-PAM maintainer
authentication
Clean.
This module is for use in situations where the superuser wishes to gain access to a service without having to enter a password.
debug
This module authenticates the user if their uid
is 0
.
Applications that are created setuid-root generally retain the
uid
of the user but run with the authority of an enhanced
effective-uid
. It is the real uid
that is checked.
In the case of the su
application the historical usage is to
permit the superuser to adopt the identity of a lesser user without
the use of a password. To obtain this behavior under Linux-PAM
the following pair of lines are needed for the corresponding entry in
the configuration file:
#
# su authentication. Root is granted access by default.
#
su auth sufficient pam_rootok.so
su auth required pam_unix_auth.so
Note. For programs that are run by the superuser (or started when the system boots) this module should not be used to authenticate users.
pam_securetty
Elliot Lee <sopwith@cuc.edu>
Red Hat Software:
currently Michael K. Johnson <johnsonm@redhat.com>
(if unavailable, contact Elliot Lee <sopwith@cuc.edu>).
authentication
/etc/securetty
file
Requires the application to fill in the PAM_TTY
item
correctly in order to act meaningfully.
Provides standard Unix securetty checking.
Provides standard Unix securetty checking, which causes authentication
for root to fail unless PAM_TTY
is set to a string listed in
the /etc/securetty
file. For all other users, it succeeds.
For canonical usage, should be listed as a required
authentication method before any sufficient
authentication
methods.
pam_tally
Tim Baverstock
auth; account
A faillog file (default location /var/log/faillog)
This module maintains a count of attempted accesses, can reset count on success, can deny access if too many attempts fail.
pam_tally comes in two parts: pam_tally.so
and
pam_tally
. The former is the PAM module and the latter, a
stand-alone program. pam_tally
is an (optional) application
which can be used to interrogate and manipulate the counter file. It
can display users' counts, set individual counts, or clear all
counts. Setting artificially high counts may be useful for blocking
users without changing their passwords. For example, one might find it
useful to clear all counts every midnight from a cron job.
The counts file is organized as a binary-word array, indexed by
uid. You can probably make sense of it with od
, if you don't
want to use the supplied appliction.
Note, there are some outstanding issues with this module:
pam_tally
is very dependant on getpw*()
- a database
of usernames would be much more flexible; the `keep a count of current
logins' bit has been #ifdef
'd out and you can only reset the
counter on successful authentication, for now.
onerr=
(succeed
|fail
):
if something weird happens, such as unable to open the file, how
should the module react?file=
/where/to/keep/counts:
specify the file location for the counts.
The default location is /var/log/faillog
.
onerr=
(succeed
|fail
);
file=
/where/to/keep/counts;
no_magic_root
The authentication component of this module increments the attempted login counter.
The module argument no_magic_root
is used to indicate that if
the module is invoked by a user with uid=0, then the counter is
incremented. The sys-admin should use this for daemon-launched
services, like telnet
/rsh
/login
. For user
launched services, like su
, this argument should be omitted.
By way of more explanation, when a process already running as root
tries to access some service, the access is magic, and
bypasses pam_tally
's checks: this is handy for su
ing
from root into an account otherwise blocked. However, for services
like telnet
or login
, which always effectively run
from the root account, root (ie everyone) shouldn't be granted this
magic status, and the flag `no_magic_root' should be set in this
situation, as noted in the summary above.
onerr=
(succeed
|fail
);
file=
/where/to/keep/counts;
deny=
n;
no_magic_root
;
even_deny_root_account
;
reset
;
no_reset
;
per_user
;
no_lock_time
The account component can deny access and/or reset the attempts counter. It also checks to make sure that the counts file is a plain file and not world writable.
The deny=
n option is used to deny access if tally
for this user exceeds n. The presence of
deny=
n changes the default for
reset
/no_reset
to reset
, unless the user
trying to gain access is root and the no_magic_root
option
has NOT been specified.
The no_magic_root
option ensures that access attempts by root
DON'T ignore deny. Use this for daemon-based stuff, like
telnet
/rsh
/login
.
The even_deny_root_account
option is used to ensure that the
root account can become unavailable. Note that magic root
trying to gain root bypasses this, but normal users can be locked out.
The reset
option instructs the module to reset count to 0 on
successful entry, even for magic root. The no_reset
option is
used to instruct the module to not reset the count on successful
entry. This is the default unless deny
exists and the user
attempting access is NOT magic root.
If /var/log/faillog
contains a non-zero .fail_max
field for this user then the per_user
module argument will
ensure that the module uses this value and not the global
deny=
n parameter.
The no_lock_time
option is for ensuring that the module does
not use the .fail_locktime
field in /var/log/faillog for this
user.
Normally, failed attempts to access root will NOT cause the
root account to become blocked, to prevent denial-of-service: if your
users aren't given shell accounts and root may only login via
su
or at the machine console (not
telnet
/rsh
, etc), this is safe. If you really want
root to be blocked for some given service, use
even_deny_root_account
.
pam_time
Andrew G. Morgan <morgan@kernel.org>
Author
account
Requires a configuration file /etc/security/time.conf
Through the PAM_TTY
item only
Running a well regulated system occasionally involves restricting access to certain services in a selective manner. This module offers some time control for access to services offered by a system. Its actions are determined with a configuration file. This module can be configured to deny access to (individual) users based on their name, the time of day, the day of week, the service they are applying for and their terminal from which they are making their request.
This module bases its actions on the rules listed in its configuration
file: /etc/security/time.conf
. Each rule has the following
form,
services;
ttys;
users;
times
In words, each rule occupies a line, terminated with a newline or the
beginning of a comment; a `#
'. It contains four fields separated
with semicolons, `;
'. The fields are as follows:
By a logic list we mean a sequence of tokens (associated with the
appropriate PAM_
item), containing no more than one wildcard
character; `*
', and optionally prefixed with a negation operator;
`!
'. Such a sequence is concatenated with one of two logical
operators: &
(logical AND) and |
(logical OR). Two
examples are: !morgan&!root
, indicating that this rule
does not apply to the user morgan
nor to root
; and
tty*&!ttyp*
, which indicates that the rule applies only
to console terminals but not pseudoterminals.
MoTuSa
, indicates Monday Tuesday and Saturday. Note that
repeated days are unset; MoTuMo
indicates Tuesday, and
MoWk
means all weekdays bar Monday. The two character
combinations accepted are,
Mo Tu We Th Fr Sa Su Wk Wd Al
The last two of these being weekend days and all 7 days of
the week respectively.
The time range part is a pair of 24-hour times, HHMM, separated
by a hyphen -- indicating the start and finish time for the rule. If
the finsish time is smaller than the start time, it is assumed to
apply on the following day. For an example, Mo1800-0300
indicates
that the permitted times are Monday night from 6pm to 3am the
following morning.
Note, that the given time restriction is only applied when the first three fields are satisfied by a user's application for service.
For convenience and readability a rule can be extended beyond a single
line with a `\
newline'.
The use of this module is initiated with an entry in the Linux-PAM configuration file of the following type:
#
# apply pam_time accounting to login requests
#
login account required pam_time.so
where, here we are applying the module to the login application.
Some examples of rules that can be placed in the
/etc/security/time.conf
configuration file are the following:
login ; tty* & !ttyp* ; !root ; !Al0000-2400
all users except for root
are denied access to console-login at
all times.
games ; * ; !waster ; Wd0000-2400 | Wk1800-0800
games (configured to use Linux-PAM) are only to be accessed out of
working hours. This rule does not apply to the user waster
.
Note, currently there is no daemon enforcing the end of a session. This needs to be remedied.
Poorly formatted rules are logged as errors using syslog(3)
.
pam_unix
account; authentication; password; session
This is the standard Unix authentication module. It uses standard calls from the system's libraries to retrieve and set account information as well as authentication. Usually this is obtained from the /etc/passwd and the /etc/shadow file as well if shadow is enabled.
debug
; audit
The debug
argument makes the accounting functions of this module
syslog(3)
more information on its actions. (Remaining arguments
supported by the other functions of this module are silently ignored,
but others are logged as errors through syslog(3)
). The audit
argument causes even more logging.
Based on the following shadow
elements:
expire
;
last_change
;
max_change
;
min_change
;
warn_change
,
this module performs the task of establishing the status of the user's
account and password. In the case of the latter, it may offer advice
to the user on changing their password or, through the
PAM_AUTHTOKEN_REQD
return, delay giving service to the user until
they have established a new password. The entries listed above are
documented in the GNU Libc info documents. Should the user's record
not contain one or more of these entries, the corresponding shadow
check is not performed.
In its accounting mode, this module can be inserted as follows:
#
# Ensure users account and password are still active
#
login account required pam_unix.so
debug
;
audit
;
use_first_pass
;
try_first_pass
;
nullok
;
nodelay
The debug
argument makes the authentication functions of this
module syslog(3)
more information on its actions. The audit
causes even more information to be logged.
The default action of this module is to not permit the user access to
a service if their official password is blank. The nullok
argument overrides this default.
When given the argument try_first_pass
, before prompting the user
for their password, the module first tries the previous stacked
auth
-module's password in case that satisfies this module as
well. The argument use_first_pass
forces the module to use such a
recalled password and will never prompt the user - if no password is
available or the password is not appropriate, the user will be denied
access.
The argument, nodelay
, can be used to discourage the
authentication component from requesting a delay should the
authentication as a whole fail. The default action is for the module
to request a delay-on-failure of the order of one second.
Remaining arguments, supported by the other functions of this module,
are silently ignored. Other arguments are logged as errors through
syslog(3)
.
A helper binary, unix_chkpwd
, is provided to check the user's
password when it is stored in a read protected database. This binary
is very simple and will only check the password of the user invoking
it. It is called transparently on behalf of the user by the
authenticating component of this module. In this way it is possible
for applications like xlock to work without being setuid-root.
The correct functionality of this module is dictated by having an
appropriate /etc/nsswitch.conf
file, the user
databases specified there dictate the source of the authenticated
user's record.
In its authentication mode, this module can be inserted as follows:
#
# Authenticate the user
#
login auth required pam_unix.so
debug
;
audit
;
nullok
;
not_set_pass
;
use_authtok
;
try_first_pass
;
use_first_pass
;
md5
;
bigcrypt
;
shadow
;
nis
;
remember
This part of the pam_unix
module performs the task of updating
the user's password.
In the case of conventional unix databases (which store the password
encrypted) the md5
argument is used to do the encryption with the
MD5 function as opposed to the conventional crypt(3)
call.
As an alternative to this, the bigcrypt
argument can be used to
encrypt more than the first 8 characters of a password with DEC's
(Digital Equipment Cooperation) `C2' extension to the standard UNIX
crypt()
algorithm.
The nullok
argument is used to permit the changing of a password
from an empty one. Without this argument, empty passwords are
treated as account-locking ones.
The argument use_first_pass
is used to lock the choice of old and
new passwords to that dictated by the previously stacked password
module. The try_first_pass
argument is used to avoid the user
having to re-enter an old password when pam_unix
follows a module
that possibly shared the user's old password - if this old password is
not correct the user will be prompted for the correct one. The
argument use_authtok
is used to force this module to set the
new password to the one provided by the previously stacked
password
module (this is used in an example of the stacking of
the Cracklib module documented above).
The not_set_pass
argument is used to inform the module that it is
not to pay attention to/make available the old or new passwords from/to
other (stacked) password modules.
The debug
argument makes the password functions of this module
syslog(3)
more information on its actions. Other arguments may be
logged as erroneous to syslog(3)
. The audit
argument causes
even more information to be logged.
With the nis
argument, pam_unix
will attempt to use NIS RPC
for setting new passwords.
The remember
argument takes one value. This is the number of most
recent passwords to save for each user. These are saved in
/etc/security/opasswd
in order to force password change history
and keep the user from alternating between the same password too frequently.
Standard usage:
#
# Change the users password
#
passwd password required pam_unix.so
An example of the stacking of this module with respect to the
pluggable password checking module, pam_cracklib
:
#
# Change the users password
#
passwd password required pam_cracklib.so retry=3 minlen=6 difok=3
passwd password required pam_unix.so use_authtok nullok md5
No arguments are recognized by this module component. Its action is
simply to log the username and the service-type to
syslog(3)
. Messages are logged at the beginning and end of the
user's session.
The use of the session modules is straightforward:
#
# session opening and closing
#
login session required pam_unix.so
pam_userdb
Cristian Gafton <gafton@redhat.com>
Author.
authentication
Requires Berkeley DB.
Look up users in a .db database and verify their password against what is contained in that database.
debug
;
icase
;
dump
;
db=XXXX
;
This module is used to verify a username/password pair against values stored in a Berkeley DB database. The database is indexed by the username, and the data fields corresponding to the username keys are the passwords, in unencrypted form, so caution must be exercised over the access rights to the DB database itself..
The module will read the password from the user using the conversation mechanism. If
you are using this module on top of another authetication module (like pam_pwdb
;)
then you should tell that module to read the entered password from the PAM_AUTHTOK field, which is set by this module.
The action of the module may be modified from this default by one or
more of the following flags in the /etc/pam.d/<service>
file.
debug
-
Supply more debugging information to syslog(3)
.
icase
-
Perform the password comparisons case insensitive.
dump
-
dump all the entries in the database to the log (eek,
don't do this by default!)
db=XXXX
-
use the database found on pathname XXXX. Note that Berkeley DB usually adds the
needed filename extension for you, so you should use something like /etc/foodata
instead of /etc/foodata.db
.
This is a normal ftp configuration file (usually placed as /etc/pam.d/ftp
on most systems) that will accept for login users whose username/password pairs are
provided in the /tmp/dbtest.db
file:
#%PAM-1.0
auth required pam_listfile.so item=user sense=deny file=/etc/ftpusers onerr=succeed
auth sufficient pam_userdb.so icase db=/tmp/dbtest
auth required pam_pwdb.so shadow nullok try_first_pass
auth required pam_shells.so
account required pam_pwdb.so
session required pam_pwdb.so
pam_warn
Andrew G. Morgan <morgan@kernel.org>
Author.
authentication; password
logs information about the remote user and host (if pam-items are known)
This module is principally for logging information about a proposed authentication or application to update a password.
Log the service, terminal, user, remote user and remote host to
syslog(3)
. The items are not probed for, but instead obtained
from the standard pam-items.
an example is provided in the configuration file section above.
pam_wheel
Cristian Gafton <gafton@redhat.com>
Author.
authentication
Requires libpwdb.
Only permit root access to members of the wheel (gid=0
) group.
debug
;
use_uid
;
trust
;
deny
;
group=XXXX
This module is used to enforce the so-called wheel group. By
default, it permits root access to the system if the applicant user is
a member of the wheel
group (first, the module checks for the
existence of a 'wheel
' group. Otherwise the module defines the
group with group-id 0
to be the wheel group).
The action of the module may be modified from this default by one or
more of the following flags in the /etc/pam.conf
file.
debug
-
Supply more debugging information to syslog(3)
.
use_uid
-
This option modifies the behavior of the module by using the current
uid
of the process and not the getlogin(3)
name of the user.
This option is useful for being able to jump from one account to
another, for example with 'su'.
trust
-
This option instructs the module to return PAM_SUCCESS
should it
find the user applying for root privilege is a member of the wheel
group. The default action is to return PAM_IGNORE
in this
situation. By using the trust
option it is possible to arrange
for wheel
-group members to become root without typing a
password. USE WITH CARE.
deny
-
This is used to reverse the logic of the module's behavior.
If the user is trying to get uid=0
access and is a member of the wheel
group, deny access (for the wheel group, this is perhaps nonsense!):
it is intended for use in conjunction with the group=
argument...
group=XXXX
-
Instead of checking the gid=0
group, use the user's XXXX
group membership for the authentication. Here, XXXX
is the name
of the group and not its numeric identifier.
To restrict access to superuser status to the members of the
wheel
group, use the following entries in your configuration
file:
#
# root gains access by default (rootok), only wheel members can
# become root (wheel) but Unix authenticate non-root applicants.
#
su auth sufficient pam_rootok.so
su auth required pam_wheel.so
su auth required pam_unix_auth.so