DOC HOME SITE MAP MAN PAGES GNU INFO SEARCH PRINT BOOK
 

NAME

racoon - IKE (ISAKMP/Oakley) key management daemon

SYNOPSIS

/usr/sbin/racoon -words [-BdFv46] -words [-f configfile] -words [-l logfile] -words [-p isakmp-port]

DESCRIPTION

racoon speaks IKE (ISAKMP/Oakley) key management protocol, to establish security association with other hosts. SPD (Security Policy Database) in the kernel usually triggers to start racoon racoon usually sends all of informational messages, warnings and error messages to syslogd(8) with the facility LOG_DAEMON, the priority LOG_INFO. Debugging messages are sent with the priority LOG_DEBUG. You should configure syslog.conf appropriately to see these messages.

-B
Install SA(s) from the file which is specified in racoon.conf(5).
-d
Increase the debug level. Multiple -d will increase the debug level even more.
-F
Run racoon in the foreground.
-f configfile
Use configfile as the configuration file instead of the default.
-l logfile
Use logfile as the logging file instead of syslogd(8).
-p isakmp-port
Listen to ISAKMP key exchange on port isakmp-port instead of the default port number, 500.
-v
The flag causes the packet dump be more verbose, with higher debugging level.
-4
-6
Specifies the default address family for the sockets.

racoon assumes the presence of kernel random number device at /dev/urandom Informational messages are labeled info and debugging messages are labeled debug You have to configure syslog.conf(4bsd) if you want to see them in a logging file.  

RETURN VALUES

The command exits with 0 on success, and non-zero on errors.  

FILES

/etc/inet/racoon.conf
default configuration file.

 

SEE ALSO

setkey(8), racoon.conf(5), syslogd(1M)  

HISTORY

The racoon command first appeared in ``YIPS'' Yokogawa IPsec implementation.


This document was created by man2html.