Modifying resource allocation for a device
You can choose from pre-set resource allocations defined by the
card's manufacturer, or manually modify those settings, by using
the Edit feature of the
PnP Configuration Manager.
When you click on Edit, a list of resource descriptions
and resource settings appear for the selected device.
Resource descriptions might include:
Current-
the current state of the device when you entered the manager
Good-
a set of resource settings designed to work well with this device
Acceptable-
another set of resource settings designed to work well with this device
Sub-Optimal-
resource settings that will work but are not preferred for this
adapter
The list you see might contain other choices defined by the
manufacturer, and there can be multiple versions of each type.
It may be necessary to use one of the less preferable options
if sufficient system resources are not available.
To select or change settings:
-
Click on a set of resource settings.
-
If you click on OK
and the changes you made do not conflict with other devices on your
system, you return to the main window, where the device now appears
with a check mark icon.
If the changes you made do conflict with other devices on your
system, the
Possible Conflicts window appears.
-
After you return to the main window, you must
Apply these changes to enable the device.
When prompted, click on OK for the changes to take
effect immediately, or Cancel to
defer hardware configuration.
© 2004 The SCO Group, Inc. All rights reserved.
UnixWare 7 Release 7.1.4 - 22 April 2004