|
|
If you need to add or change the mouse, you must use mouseadmin(1) to configure the mouse before it can be used.
Certain system requirements must be met for successful installation of the mouse driver package:
If you install a mouse on your computer, it can be a serial mouse, a bus mouse or a PS2/Keyboard mouse. Please refer to the documentation supplied with your mouse to determine your mouse type.
Check to see if your mouse has two buttons, or three buttons. The default is two buttons.
An interrupt vector may also be referred to as an ``IRQ''. The default provided by the installation process will usually suffice, but you should refer to your mouse manual to check this value and change it from the default if necessary.
Many computers have two ports, which are typically labeled COM1 and COM2 or ``Serial A'' and ``Serial B''. On UnixWare systems these ports are referred to as tty00 and tty01, respectively. Be careful not to confuse a printer port, which is also included on most computers, with COM2.